Production and application of schizophyllan in microbial enhanced heavy oil recovery

S. J. Joshi, Y. M. Al-Wahaibi, S. Al-Bahry, A. Elshafie, A. S. Al-Bemani, A. Al-Hashmi, P. Samuel, M. Sassi, H. Al-Farsi, M. S. Al-Mandhari

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Abstract

Generally partially hydrolyzed polyacrylamides (HPAM) are used worldwide for polymer-based oil recovery processes. However there aree some problems associated with HPAM applications such as, treatment of produced water, oil-water separation and toxicity issues associated with degradation products of HPAM. Schizophyllan biopolymer is biodegradable and environmental friendly alternative to chemical polymers used for EOR applications. In present work we studied the schizophyllan production by fungi Schizophyllum commune ATCC38548, its structural characterization and potential applications in Microbial Enhanced Heavy Oil Recovery (MEOR). Different minimal production media containing carbohydrate based carbon sources were screened for better biopolymer production. During the course of experiments we studied microbial growth profile, biopolymer production, and rheological properties of biopolymer, chemical characterization and application of biopolymer in enhancing heavy oil recovery using Berea sandstone cores. The biopolymer was produced in significant quantities and increased the viscosity of the production medium after 9 days of incubation. Viscosities were measured using rheometer at different shear rates (0.1-100 s-1) and temperatures, where it was found to be isothermal over a wide range of temperature with strong shear thinning behavior. After 14 days of incubation, the viscosity was 21535-43 cP at shear rate from 0.1-100 s-1, respectively. Thermogravimetric analysis (TGA) analysis showed that the moisture content in purified biopolymer was 6.3%; it was quite stable till 100-200 °C and melted at temperatures higher than 250 °C. It was characterized as schizophyllan by MALDI-TOF-MS and NMR (1H and proton decoupled 13C NMR) analysis. The repeating tetrasaccharide unit of schizophyllan structure comprised of homoglucan with β-1, 3-linked backbone and single β-1, 6-linked laterally glucose side chains at every third residue. The biopolymer was used for MEOR experiments at 45 °C, using Berea sandstone core plugs. The biopolymer injection resulted in 28% additional heavy oil recovery over residual oil saturation (Sor).

Original languageEnglish
Title of host publicationSociety of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016
PublisherSociety of Petroleum Engineers
ISBN (Print)9781613994450
Publication statusPublished - 2016
EventSPE EOR Conference at Oil and Gas West Asia, OGWA 2016 - Muscat, Oman
Duration: Mar 21 2016Mar 23 2016

Other

OtherSPE EOR Conference at Oil and Gas West Asia, OGWA 2016
CountryOman
CityMuscat
Period3/21/163/23/16

Fingerprint

Sizofiran
Biopolymers
heavy oil
Crude oil
Recovery
viscosity
nuclear magnetic resonance
oil
Polyacrylates
polymer
incubation
Oils
Viscosity
Sandstone
Shear deformation
Polymers
thinning
carbohydrate
moisture content
glucose

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Fuel Technology
  • Geochemistry and Petrology

Cite this

Joshi, S. J., Al-Wahaibi, Y. M., Al-Bahry, S., Elshafie, A., Al-Bemani, A. S., Al-Hashmi, A., ... Al-Mandhari, M. S. (2016). Production and application of schizophyllan in microbial enhanced heavy oil recovery. In Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016 Society of Petroleum Engineers.

Production and application of schizophyllan in microbial enhanced heavy oil recovery. / Joshi, S. J.; Al-Wahaibi, Y. M.; Al-Bahry, S.; Elshafie, A.; Al-Bemani, A. S.; Al-Hashmi, A.; Samuel, P.; Sassi, M.; Al-Farsi, H.; Al-Mandhari, M. S.

Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016. Society of Petroleum Engineers, 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Joshi, SJ, Al-Wahaibi, YM, Al-Bahry, S, Elshafie, A, Al-Bemani, AS, Al-Hashmi, A, Samuel, P, Sassi, M, Al-Farsi, H & Al-Mandhari, MS 2016, Production and application of schizophyllan in microbial enhanced heavy oil recovery. in Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016. Society of Petroleum Engineers, SPE EOR Conference at Oil and Gas West Asia, OGWA 2016, Muscat, Oman, 3/21/16.
Joshi SJ, Al-Wahaibi YM, Al-Bahry S, Elshafie A, Al-Bemani AS, Al-Hashmi A et al. Production and application of schizophyllan in microbial enhanced heavy oil recovery. In Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016. Society of Petroleum Engineers. 2016
Joshi, S. J. ; Al-Wahaibi, Y. M. ; Al-Bahry, S. ; Elshafie, A. ; Al-Bemani, A. S. ; Al-Hashmi, A. ; Samuel, P. ; Sassi, M. ; Al-Farsi, H. ; Al-Mandhari, M. S. / Production and application of schizophyllan in microbial enhanced heavy oil recovery. Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016. Society of Petroleum Engineers, 2016.
@inproceedings{31900764e44a4161971c1a4bb5fbba2e,
title = "Production and application of schizophyllan in microbial enhanced heavy oil recovery",
abstract = "Generally partially hydrolyzed polyacrylamides (HPAM) are used worldwide for polymer-based oil recovery processes. However there aree some problems associated with HPAM applications such as, treatment of produced water, oil-water separation and toxicity issues associated with degradation products of HPAM. Schizophyllan biopolymer is biodegradable and environmental friendly alternative to chemical polymers used for EOR applications. In present work we studied the schizophyllan production by fungi Schizophyllum commune ATCC38548, its structural characterization and potential applications in Microbial Enhanced Heavy Oil Recovery (MEOR). Different minimal production media containing carbohydrate based carbon sources were screened for better biopolymer production. During the course of experiments we studied microbial growth profile, biopolymer production, and rheological properties of biopolymer, chemical characterization and application of biopolymer in enhancing heavy oil recovery using Berea sandstone cores. The biopolymer was produced in significant quantities and increased the viscosity of the production medium after 9 days of incubation. Viscosities were measured using rheometer at different shear rates (0.1-100 s-1) and temperatures, where it was found to be isothermal over a wide range of temperature with strong shear thinning behavior. After 14 days of incubation, the viscosity was 21535-43 cP at shear rate from 0.1-100 s-1, respectively. Thermogravimetric analysis (TGA) analysis showed that the moisture content in purified biopolymer was 6.3{\%}; it was quite stable till 100-200 °C and melted at temperatures higher than 250 °C. It was characterized as schizophyllan by MALDI-TOF-MS and NMR (1H and proton decoupled 13C NMR) analysis. The repeating tetrasaccharide unit of schizophyllan structure comprised of homoglucan with β-1, 3-linked backbone and single β-1, 6-linked laterally glucose side chains at every third residue. The biopolymer was used for MEOR experiments at 45 °C, using Berea sandstone core plugs. The biopolymer injection resulted in 28{\%} additional heavy oil recovery over residual oil saturation (Sor).",
author = "Joshi, {S. J.} and Al-Wahaibi, {Y. M.} and S. Al-Bahry and A. Elshafie and Al-Bemani, {A. S.} and A. Al-Hashmi and P. Samuel and M. Sassi and H. Al-Farsi and Al-Mandhari, {M. S.}",
year = "2016",
language = "English",
isbn = "9781613994450",
booktitle = "Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016",
publisher = "Society of Petroleum Engineers",

}

TY - GEN

T1 - Production and application of schizophyllan in microbial enhanced heavy oil recovery

AU - Joshi, S. J.

AU - Al-Wahaibi, Y. M.

AU - Al-Bahry, S.

AU - Elshafie, A.

AU - Al-Bemani, A. S.

AU - Al-Hashmi, A.

AU - Samuel, P.

AU - Sassi, M.

AU - Al-Farsi, H.

AU - Al-Mandhari, M. S.

PY - 2016

Y1 - 2016

N2 - Generally partially hydrolyzed polyacrylamides (HPAM) are used worldwide for polymer-based oil recovery processes. However there aree some problems associated with HPAM applications such as, treatment of produced water, oil-water separation and toxicity issues associated with degradation products of HPAM. Schizophyllan biopolymer is biodegradable and environmental friendly alternative to chemical polymers used for EOR applications. In present work we studied the schizophyllan production by fungi Schizophyllum commune ATCC38548, its structural characterization and potential applications in Microbial Enhanced Heavy Oil Recovery (MEOR). Different minimal production media containing carbohydrate based carbon sources were screened for better biopolymer production. During the course of experiments we studied microbial growth profile, biopolymer production, and rheological properties of biopolymer, chemical characterization and application of biopolymer in enhancing heavy oil recovery using Berea sandstone cores. The biopolymer was produced in significant quantities and increased the viscosity of the production medium after 9 days of incubation. Viscosities were measured using rheometer at different shear rates (0.1-100 s-1) and temperatures, where it was found to be isothermal over a wide range of temperature with strong shear thinning behavior. After 14 days of incubation, the viscosity was 21535-43 cP at shear rate from 0.1-100 s-1, respectively. Thermogravimetric analysis (TGA) analysis showed that the moisture content in purified biopolymer was 6.3%; it was quite stable till 100-200 °C and melted at temperatures higher than 250 °C. It was characterized as schizophyllan by MALDI-TOF-MS and NMR (1H and proton decoupled 13C NMR) analysis. The repeating tetrasaccharide unit of schizophyllan structure comprised of homoglucan with β-1, 3-linked backbone and single β-1, 6-linked laterally glucose side chains at every third residue. The biopolymer was used for MEOR experiments at 45 °C, using Berea sandstone core plugs. The biopolymer injection resulted in 28% additional heavy oil recovery over residual oil saturation (Sor).

AB - Generally partially hydrolyzed polyacrylamides (HPAM) are used worldwide for polymer-based oil recovery processes. However there aree some problems associated with HPAM applications such as, treatment of produced water, oil-water separation and toxicity issues associated with degradation products of HPAM. Schizophyllan biopolymer is biodegradable and environmental friendly alternative to chemical polymers used for EOR applications. In present work we studied the schizophyllan production by fungi Schizophyllum commune ATCC38548, its structural characterization and potential applications in Microbial Enhanced Heavy Oil Recovery (MEOR). Different minimal production media containing carbohydrate based carbon sources were screened for better biopolymer production. During the course of experiments we studied microbial growth profile, biopolymer production, and rheological properties of biopolymer, chemical characterization and application of biopolymer in enhancing heavy oil recovery using Berea sandstone cores. The biopolymer was produced in significant quantities and increased the viscosity of the production medium after 9 days of incubation. Viscosities were measured using rheometer at different shear rates (0.1-100 s-1) and temperatures, where it was found to be isothermal over a wide range of temperature with strong shear thinning behavior. After 14 days of incubation, the viscosity was 21535-43 cP at shear rate from 0.1-100 s-1, respectively. Thermogravimetric analysis (TGA) analysis showed that the moisture content in purified biopolymer was 6.3%; it was quite stable till 100-200 °C and melted at temperatures higher than 250 °C. It was characterized as schizophyllan by MALDI-TOF-MS and NMR (1H and proton decoupled 13C NMR) analysis. The repeating tetrasaccharide unit of schizophyllan structure comprised of homoglucan with β-1, 3-linked backbone and single β-1, 6-linked laterally glucose side chains at every third residue. The biopolymer was used for MEOR experiments at 45 °C, using Berea sandstone core plugs. The biopolymer injection resulted in 28% additional heavy oil recovery over residual oil saturation (Sor).

UR - http://www.scopus.com/inward/record.url?scp=84969190262&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84969190262&partnerID=8YFLogxK

M3 - Conference contribution

SN - 9781613994450

BT - Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016

PB - Society of Petroleum Engineers

ER -