Design of discrete-time repetitive control system for pole placement and application

Manabu Yamada, Zaier Riadh, Yasuyuki Funahashi

Research output: Contribution to journalArticle

43 Citations (Scopus)

Abstract

In this paper, a new repetitive control system is proposed from the viewpoint of pole placement. The contributions are as follows. First, the proposed repetitive controller can assign all poles of the closed-loop system on a disk with a given radius and the center at the origin. As a result, faster convergence of the controlled error to zero than the previous ones is obtained. Secondly, the proposed controller is obtained explicitly, and the design method does not require an equation to be solved. The design effort is independent of the period of the repetitive signals to be tracked or rejected. In other words, the design effort is very small, even if the period is very large. Thirdly, the robustness of the control system is improved by introducing a low-pass finite-duration impulse-response filter in the controller. Finally, the proposed scheme is applied to a dc servo motor system, and the effectiveness is demonstrated by both simulations and experiments.

Original languageEnglish
Pages (from-to)110-118
Number of pages9
JournalIEEE/ASME Transactions on Mechatronics
Volume4
Issue number2
DOIs
Publication statusPublished - 1999

Fingerprint

Discrete time control systems
Poles
Controllers
Control systems
Impulse response
Robustness (control systems)
Closed loop systems
Experiments

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Computer Science Applications
  • Electrical and Electronic Engineering

Cite this

Design of discrete-time repetitive control system for pole placement and application. / Yamada, Manabu; Riadh, Zaier; Funahashi, Yasuyuki.

In: IEEE/ASME Transactions on Mechatronics, Vol. 4, No. 2, 1999, p. 110-118.

Research output: Contribution to journalArticle

@article{b93ac526b069437b82c7c869aed57ed2,
title = "Design of discrete-time repetitive control system for pole placement and application",
abstract = "In this paper, a new repetitive control system is proposed from the viewpoint of pole placement. The contributions are as follows. First, the proposed repetitive controller can assign all poles of the closed-loop system on a disk with a given radius and the center at the origin. As a result, faster convergence of the controlled error to zero than the previous ones is obtained. Secondly, the proposed controller is obtained explicitly, and the design method does not require an equation to be solved. The design effort is independent of the period of the repetitive signals to be tracked or rejected. In other words, the design effort is very small, even if the period is very large. Thirdly, the robustness of the control system is improved by introducing a low-pass finite-duration impulse-response filter in the controller. Finally, the proposed scheme is applied to a dc servo motor system, and the effectiveness is demonstrated by both simulations and experiments.",
author = "Manabu Yamada and Zaier Riadh and Yasuyuki Funahashi",
year = "1999",
doi = "10.1109/3516.769538",
language = "English",
volume = "4",
pages = "110--118",
journal = "IEEE/ASME Transactions on Mechatronics",
issn = "1083-4435",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "2",

}

TY - JOUR

T1 - Design of discrete-time repetitive control system for pole placement and application

AU - Yamada, Manabu

AU - Riadh, Zaier

AU - Funahashi, Yasuyuki

PY - 1999

Y1 - 1999

N2 - In this paper, a new repetitive control system is proposed from the viewpoint of pole placement. The contributions are as follows. First, the proposed repetitive controller can assign all poles of the closed-loop system on a disk with a given radius and the center at the origin. As a result, faster convergence of the controlled error to zero than the previous ones is obtained. Secondly, the proposed controller is obtained explicitly, and the design method does not require an equation to be solved. The design effort is independent of the period of the repetitive signals to be tracked or rejected. In other words, the design effort is very small, even if the period is very large. Thirdly, the robustness of the control system is improved by introducing a low-pass finite-duration impulse-response filter in the controller. Finally, the proposed scheme is applied to a dc servo motor system, and the effectiveness is demonstrated by both simulations and experiments.

AB - In this paper, a new repetitive control system is proposed from the viewpoint of pole placement. The contributions are as follows. First, the proposed repetitive controller can assign all poles of the closed-loop system on a disk with a given radius and the center at the origin. As a result, faster convergence of the controlled error to zero than the previous ones is obtained. Secondly, the proposed controller is obtained explicitly, and the design method does not require an equation to be solved. The design effort is independent of the period of the repetitive signals to be tracked or rejected. In other words, the design effort is very small, even if the period is very large. Thirdly, the robustness of the control system is improved by introducing a low-pass finite-duration impulse-response filter in the controller. Finally, the proposed scheme is applied to a dc servo motor system, and the effectiveness is demonstrated by both simulations and experiments.

UR - http://www.scopus.com/inward/record.url?scp=0032685265&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0032685265&partnerID=8YFLogxK

U2 - 10.1109/3516.769538

DO - 10.1109/3516.769538

M3 - Article

VL - 4

SP - 110

EP - 118

JO - IEEE/ASME Transactions on Mechatronics

JF - IEEE/ASME Transactions on Mechatronics

SN - 1083-4435

IS - 2

ER -