Control of grid-connected split-shaft microturbine distributed generator

A. Al-Hinai; K. Schoder; A. Feliachi

doi:10.1109/SSST.2003.1194535

Control of grid-connected split-shaft microturbine distributed generator

A. Al-Hinai, K. Schoder, A. Feliachi

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

41 Citations (Scopus)

Abstract

In this paper, a split-shaft microturbine model using induction generators is used to assist transient stability of microturbines when connected to the grid as distributed generator. Microturbines can be controlled via two paths, control of the turbine's mechanical power and control of terminal voltage from induction generator using connected SVC at the generator's terminal. PI controllers, for SVC and output turbine mechanical power, are designed based on a linearized model using genetic algorithms as optimization technique. Model development and simulation are presented within the MATLAB/Simulink (Power System Analysis Toolbox (PAT)) environment using various toolboxes.

Original language	English
Title of host publication	Proceedings of the 35th Southeastern Symposium on System Theory, SSST 2003
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	84-88
Number of pages	5
ISBN (Electronic)	0780376978
DOIs	https://doi.org/10.1109/SSST.2003.1194535
Publication status	Published - 2003
Externally published	Yes
Event	35th IEEE Southeastern Symposium on System Theory, SSST 2003 - Morgantown, United States Duration: Mar 18 2003 → …

Publication series

Name	Proceedings of the Annual Southeastern Symposium on System Theory
Volume	2003-January

Other

Other	35th IEEE Southeastern Symposium on System Theory, SSST 2003
Country/Territory	United States
City	Morgantown
Period	3/18/03 → …

Keywords

Distributed power generation
Induction generators
Mathematical model
Mesh generation
Power system modeling
Power system simulation
Power system transients
Stability
Static VAr compensators
Voltage control

ASJC Scopus subject areas

Control and Systems Engineering
General Mathematics

Access to Document

10.1109/SSST.2003.1194535

Cite this

Al-Hinai, A., Schoder, K., & Feliachi, A. (2003). Control of grid-connected split-shaft microturbine distributed generator. In Proceedings of the 35th Southeastern Symposium on System Theory, SSST 2003 (pp. 84-88). Article 1194535 (Proceedings of the Annual Southeastern Symposium on System Theory; Vol. 2003-January). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/SSST.2003.1194535

Control of grid-connected split-shaft microturbine distributed generator. / Al-Hinai, A.; Schoder, K.; Feliachi, A.
Proceedings of the 35th Southeastern Symposium on System Theory, SSST 2003. Institute of Electrical and Electronics Engineers Inc., 2003. p. 84-88 1194535 (Proceedings of the Annual Southeastern Symposium on System Theory; Vol. 2003-January).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Al-Hinai, A, Schoder, K & Feliachi, A 2003, Control of grid-connected split-shaft microturbine distributed generator. in Proceedings of the 35th Southeastern Symposium on System Theory, SSST 2003., 1194535, Proceedings of the Annual Southeastern Symposium on System Theory, vol. 2003-January, Institute of Electrical and Electronics Engineers Inc., pp. 84-88, 35th IEEE Southeastern Symposium on System Theory, SSST 2003, Morgantown, United States, 3/18/03. https://doi.org/10.1109/SSST.2003.1194535

@inproceedings{bf1fa60dfaee4eed9a26eaaedaa18f70,

title = "Control of grid-connected split-shaft microturbine distributed generator",

abstract = "In this paper, a split-shaft microturbine model using induction generators is used to assist transient stability of microturbines when connected to the grid as distributed generator. Microturbines can be controlled via two paths, control of the turbine's mechanical power and control of terminal voltage from induction generator using connected SVC at the generator's terminal. PI controllers, for SVC and output turbine mechanical power, are designed based on a linearized model using genetic algorithms as optimization technique. Model development and simulation are presented within the MATLAB/Simulink (Power System Analysis Toolbox (PAT)) environment using various toolboxes.",

keywords = "Distributed power generation, Induction generators, Mathematical model, Mesh generation, Power system modeling, Power system simulation, Power system transients, Stability, Static VAr compensators, Voltage control",

author = "A. Al-Hinai and K. Schoder and A. Feliachi",

note = "Publisher Copyright: {\textcopyright} 2003 IEEE.; 35th IEEE Southeastern Symposium on System Theory, SSST 2003 ; Conference date: 18-03-2003",

year = "2003",

doi = "10.1109/SSST.2003.1194535",

language = "English",

series = "Proceedings of the Annual Southeastern Symposium on System Theory",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "84--88",

booktitle = "Proceedings of the 35th Southeastern Symposium on System Theory, SSST 2003",

}

TY - GEN

T1 - Control of grid-connected split-shaft microturbine distributed generator

AU - Al-Hinai, A.

AU - Schoder, K.

AU - Feliachi, A.

PY - 2003

Y1 - 2003

N2 - In this paper, a split-shaft microturbine model using induction generators is used to assist transient stability of microturbines when connected to the grid as distributed generator. Microturbines can be controlled via two paths, control of the turbine's mechanical power and control of terminal voltage from induction generator using connected SVC at the generator's terminal. PI controllers, for SVC and output turbine mechanical power, are designed based on a linearized model using genetic algorithms as optimization technique. Model development and simulation are presented within the MATLAB/Simulink (Power System Analysis Toolbox (PAT)) environment using various toolboxes.

AB - In this paper, a split-shaft microturbine model using induction generators is used to assist transient stability of microturbines when connected to the grid as distributed generator. Microturbines can be controlled via two paths, control of the turbine's mechanical power and control of terminal voltage from induction generator using connected SVC at the generator's terminal. PI controllers, for SVC and output turbine mechanical power, are designed based on a linearized model using genetic algorithms as optimization technique. Model development and simulation are presented within the MATLAB/Simulink (Power System Analysis Toolbox (PAT)) environment using various toolboxes.

KW - Distributed power generation

KW - Induction generators

KW - Mathematical model

KW - Mesh generation

KW - Power system modeling

KW - Power system simulation

KW - Power system transients

KW - Stability

KW - Static VAr compensators

KW - Voltage control

UR - http://www.scopus.com/inward/record.url?scp=84945182673&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84945182673&partnerID=8YFLogxK

U2 - 10.1109/SSST.2003.1194535

DO - 10.1109/SSST.2003.1194535

M3 - Conference contribution

AN - SCOPUS:84945182673

T3 - Proceedings of the Annual Southeastern Symposium on System Theory

SP - 84

EP - 88

BT - Proceedings of the 35th Southeastern Symposium on System Theory, SSST 2003

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 35th IEEE Southeastern Symposium on System Theory, SSST 2003

Y2 - 18 March 2003

ER -

Control of grid-connected split-shaft microturbine distributed generator

Abstract

Publication series

Other

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this