ملخص
The CMS Collaboration plans to equip the very forward muon system with triple-GEM detectors that can withstand the environment of the High-Luminosity LHC. This project is at the final stages of R&D and moving to production. An unprecedented large area of several 100 m2 are to be instrumented with GEM detectors which will be produced in six different sites around the world. A common construction and quality control procedure is required to ensure the performance of each detector. The quality control steps will include optical inspection, cleaning and baking of all materials and parts used to build the detector, leakage current tests of the GEM foils, high voltage tests, gas leak tests of the chambers and monitoring pressure drop vs. time, gain calibration to know the optimal operation region of the detector, gain uniformity tests, and studying the efficiency, noise and tracking performance of the detectors in a cosmic stand using scintillators.
اللغة الأصلية | English |
---|---|
رقم المقال | 03003 |
دورية | EPJ Web of Conferences |
مستوى الصوت | 174 |
المعرِّفات الرقمية للأشياء | |
حالة النشر | Published - فبراير 21 2018 |
منشور خارجيًا | نعم |
الحدث | 4th International Conference on MicroPattern Gaseous Detectors, MPGD 2015 - Trieste, Italy المدة: أكتوبر ١٢ ٢٠١٥ → أكتوبر ١٥ ٢٠١٥ |
ASJC Scopus subject areas
- ???subjectarea.asjc.3100???
الوصول إلى المستند
الملفات والروابط الأخرى
قم بذكر هذا
- APA
- Standard
- Harvard
- Vancouver
- Author
- BIBTEX
- RIS
Quality control for the first large areas of triple-GEM chambers for the CMS endcaps. / Abbaneo, D.; Abbas, M.; Abbrescia, M. وآخرون.
في: EPJ Web of Conferences, المجلد 174, 03003, ٢١.٠٢.٢٠١٨.نتاج البحث: المساهمة في مجلة › Conference article › مراجعة النظراء
}
TY - JOUR
T1 - Quality control for the first large areas of triple-GEM chambers for the CMS endcaps
AU - Abbaneo, D.
AU - Abbas, M.
AU - Abbrescia, M.
AU - Abi Akl, M.
AU - Aboamer, O.
AU - Acosta, D.
AU - Ahmad, A.
AU - Ahmed, W.
AU - Aleksandrov, A.
AU - Altieri, P.
AU - Asawatangtrakuldee, C.
AU - Aspell, P.
AU - Assran, Y.
AU - Awan, I.
AU - Bally, S.
AU - Ban, Y.
AU - Banerjee, S.
AU - Barashko, V.
AU - Barria, P.
AU - Bencze, G.
AU - Beni, N.
AU - Benussi, L.
AU - Bhopatkar, V.
AU - Bianco, S.
AU - Bos, J.
AU - Bouhali, O.
AU - Braghieri, A.
AU - Braibant, S.
AU - Buontempo, S.
AU - Calabria, C.
AU - Caponero, M.
AU - Caputo, C.
AU - Cassese, F.
AU - Castaneda, A.
AU - Cauwenbergh, S.
AU - Cavallo, F. R.
AU - Celik, A.
AU - Choi, M.
AU - Choi, S.
AU - Christiansen, J.
AU - Cimmino, A.
AU - Colafranceschi, S.
AU - Colaleo, A.
AU - Conde Garcia, A.
AU - Czellar, S.
AU - Dabrowski, M. M.
AU - De Lentdecker, G.
AU - De Oliveira, R.
AU - De Robertis, G.
AU - Dildick, S.
AU - Dorney, B.
AU - Endroczi, G.
AU - Errico, F.
AU - Fenyvesi, A.
AU - Ferry, S.
AU - Furic, I.
AU - Giacomelli, P.
AU - Gilmore, J.
AU - Golovtsov, V.
AU - Guiducci, L.
AU - Guilloux, F.
AU - Gutierrez, A.
AU - Hadjiiska, R. M.
AU - Hauser, J.
AU - Hoepfner, K.
AU - Hohlmann, M.
AU - Hoorani, H.
AU - Iaydjiev, P.
AU - Jeng, Y. G.
AU - Kamon, T.
AU - Karchin, P.
AU - Korytov, A.
AU - Krutelyov, S.
AU - Kumar, A.
AU - Kim, H.
AU - Lee, J.
AU - Lenzi, T.
AU - Litov, L.
AU - Loddo, F.
AU - Madorsky, A.
AU - Maerschalk, T.
AU - Maggi, M.
AU - Magnani, A.
AU - Mal, P. K.
AU - Mandal, K.
AU - Marchioro, A.
AU - Marinov, A.
AU - Majumdar, N.
AU - Merlin, J. A.
AU - Mitselmakher, G.
AU - Mohanty, A. K.
AU - Mohapatra, A.
AU - Molnar, J.
AU - Muhammad, S.
AU - Mukhopadhyay, S.
AU - Naimuddin, M.
AU - Nuzzo, S.
AU - Oliveri, E.
AU - Pant, L. M.
AU - Paolucci, P.
AU - Park, I.
AU - Passeggio, G.
AU - Pavlov, B.
AU - Philipps, B.
AU - Piccolo, D.
AU - Postema, H.
AU - Puig Baranac, A.
AU - Radi, A.
AU - Radogna, R.
AU - Raffone, G.
AU - Ranieri, A.
AU - Rashevski, G.
AU - Riccardi, C.
AU - Rodozov, M.
AU - Rodrigues, A.
AU - Ropelewski, L.
AU - Roychowdhury, S.
AU - Ryu, G.
AU - Ryu, M. S.
AU - Safonov, A.
AU - Salva, S.
AU - Saviano, G.
AU - Sharma, A.
AU - Sharma, A.
AU - Sharma, R.
AU - Shah, A. H.
AU - Shopova, M.
AU - Sturdy, J.
AU - Sultanov, G.
AU - Swain, S. K.
AU - Szillasi, Z.
AU - Talvitie, J.
AU - Tatarinov, A.
AU - Tuuva, T.
AU - Tytgat, M.
AU - Vai, I.
AU - Van Stenis, M.
AU - Venditti, R.
AU - Verhagen, E.
AU - Verwilligen, P.
AU - Vitulo, P.
AU - Volkov, S.
AU - Vorobyev, A.
AU - Wang, D.
AU - Wang, M.
AU - Yang, U.
AU - Yang, Y.
AU - Yonamine, R.
AU - Zaganidis, N.
AU - Zenoni, F.
AU - Zhang, A.
N1 - Funding Information: We gratefully acknowledge support from FRS-FNRS (Belgium), FWO-Flanders (Belgium), BSF-MES (Bulgaria), BMBF (Germany), DAE (India), DST (India), INFN (Italy), NRF (Korea), QNRF (Qatar), and DOE (USA). Publisher Copyright: © The Authors, published by EDP Sciences.
PY - 2018/2/21
Y1 - 2018/2/21
N2 - The CMS Collaboration plans to equip the very forward muon system with triple-GEM detectors that can withstand the environment of the High-Luminosity LHC. This project is at the final stages of R&D and moving to production. An unprecedented large area of several 100 m2 are to be instrumented with GEM detectors which will be produced in six different sites around the world. A common construction and quality control procedure is required to ensure the performance of each detector. The quality control steps will include optical inspection, cleaning and baking of all materials and parts used to build the detector, leakage current tests of the GEM foils, high voltage tests, gas leak tests of the chambers and monitoring pressure drop vs. time, gain calibration to know the optimal operation region of the detector, gain uniformity tests, and studying the efficiency, noise and tracking performance of the detectors in a cosmic stand using scintillators.
AB - The CMS Collaboration plans to equip the very forward muon system with triple-GEM detectors that can withstand the environment of the High-Luminosity LHC. This project is at the final stages of R&D and moving to production. An unprecedented large area of several 100 m2 are to be instrumented with GEM detectors which will be produced in six different sites around the world. A common construction and quality control procedure is required to ensure the performance of each detector. The quality control steps will include optical inspection, cleaning and baking of all materials and parts used to build the detector, leakage current tests of the GEM foils, high voltage tests, gas leak tests of the chambers and monitoring pressure drop vs. time, gain calibration to know the optimal operation region of the detector, gain uniformity tests, and studying the efficiency, noise and tracking performance of the detectors in a cosmic stand using scintillators.
UR - http://www.scopus.com/inward/record.url?scp=85043281696&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85043281696&partnerID=8YFLogxK
U2 - 10.1051/epjconf/201817403003
DO - 10.1051/epjconf/201817403003
M3 - Conference article
AN - SCOPUS:85043281696
SN - 2101-6275
VL - 174
JO - EPJ Web of Conferences
JF - EPJ Web of Conferences
M1 - 03003
T2 - 4th International Conference on MicroPattern Gaseous Detectors, MPGD 2015
Y2 - 12 October 2015 through 15 October 2015
ER -