TY - JOUR
T1 - Dynamic performance and ride comfort evaluation of the seat suspension system in a small agricultural tractor to attenuate low-frequency vibration transmission
AU - Jayasuriya, H. P.W.
AU - Sangpradit, Kiattisak
PY - 2014
Y1 - 2014
N2 - To obtain safety and ride-comfort conditions for tractor operators, the tractor seat suspension system was analyzed and modified to attenuate the vibration transmission. Experiments were conducted on a standard test track to investigate the effect of seat vibration on operators using a small 4-wheel tractor, and to develop a suitable seat suspension system following ISO guidelines. Dynamic and ergonomic effects of vibration on operator using conventional seat and the new design were compared ensuing standard test procedures. The supportive observations on ergonomic aspects were also made, viz. the operator heart rate, postural comfort survey, and Cornell ergonomic seating evaluation. The vibration of existing seat in vertical direction had the highest amplitude followed by the lateral and longitudinal components sequentially while the new design could significantly reduce the vertical vibration and performed well within the vibration frequencies between 2 to 8 Hz with variable damping constants 1,177.7, 716.5, 695.5, 334.7 and 69.4 ns m-1, and spring constant of 14,343 N m-1. The operator could be able to work satisfying 8 h fatigue-decreased proficiency limit, whereas the existing seat's proficiency limit was found slightly below 4 h. Postural comfort and Cornell surveys showed significant improvements in the modified seat transferring it into comfortable zone.
AB - To obtain safety and ride-comfort conditions for tractor operators, the tractor seat suspension system was analyzed and modified to attenuate the vibration transmission. Experiments were conducted on a standard test track to investigate the effect of seat vibration on operators using a small 4-wheel tractor, and to develop a suitable seat suspension system following ISO guidelines. Dynamic and ergonomic effects of vibration on operator using conventional seat and the new design were compared ensuing standard test procedures. The supportive observations on ergonomic aspects were also made, viz. the operator heart rate, postural comfort survey, and Cornell ergonomic seating evaluation. The vibration of existing seat in vertical direction had the highest amplitude followed by the lateral and longitudinal components sequentially while the new design could significantly reduce the vertical vibration and performed well within the vibration frequencies between 2 to 8 Hz with variable damping constants 1,177.7, 716.5, 695.5, 334.7 and 69.4 ns m-1, and spring constant of 14,343 N m-1. The operator could be able to work satisfying 8 h fatigue-decreased proficiency limit, whereas the existing seat's proficiency limit was found slightly below 4 h. Postural comfort and Cornell surveys showed significant improvements in the modified seat transferring it into comfortable zone.
KW - Attenuation
KW - Ergonomics
KW - Postural-comfort
KW - Ride-comfort
KW - Suspension
UR - http://www.scopus.com/inward/record.url?scp=84897428957&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84897428957&partnerID=8YFLogxK
M3 - Article
AN - SCOPUS:84897428957
SN - 1682-1130
VL - 16
SP - 207
EP - 216
JO - Agricultural Engineering International: CIGR Journal
JF - Agricultural Engineering International: CIGR Journal
IS - 1
ER -