A sequential injection method for the fluorimetric determination of aluminum in drinking water using 8-hydroxy-7-(4-sulfo-1-naphthylazo)-5-quinoline sulfonic acid

Salma M.Z. Al-Kindy*, Salwa S. Al-Ghamari, Fakhr Eldin O. Suliman

*المؤلف المقابل لهذا العمل

نتاج البحث: المساهمة في مجلةArticleمراجعة النظراء

15 اقتباسات (Scopus)

ملخص

A robust and simple sequential injection (SI) method for the assay of aluminum ions in drinking water is described. The method is based on the complex formation between aluminum and 8-hydroxy-7-(4-sulfo-1-naphthylazo)-5-quinoline sulfonic acid (HSNQ). The fluorescence of the complex is monitored at an emission wavelength of 492 nm with excitation at 357 nm. The HSNQ concentration, aspirated reagent and sample volumes were optimized simultaneously using 33 full factorial design. The optimum operating conditions are aspirated sample and reagent volumes of 90 and 70 μL, respectively, and HSNQ concentration of 20 μM. With these conditions linear calibration curves were obtained from 100 to 800 ppb. The detection limit was 4 ppb. The maximum relative standard deviation of the method was 1.43% (n = 5). The method was successfully applied for the determination of aluminum in drinking water samples.

اللغة الأصليةEnglish
الصفحات (من إلى)1174-1179
عدد الصفحات6
دوريةSpectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy
مستوى الصوت68
رقم الإصدار5
المعرِّفات الرقمية للأشياء
حالة النشرPublished - ديسمبر 31 2007

ASJC Scopus subject areas

  • ???subjectarea.asjc.1600.1602???
  • ???subjectarea.asjc.3100.3107???
  • ???subjectarea.asjc.3100.3105???
  • ???subjectarea.asjc.1600.1607???

بصمة

أدرس بدقة موضوعات البحث “A sequential injection method for the fluorimetric determination of aluminum in drinking water using 8-hydroxy-7-(4-sulfo-1-naphthylazo)-5-quinoline sulfonic acid'. فهما يشكلان معًا بصمة فريدة.

قم بذكر هذا