In this research work, raw poultry manure biochar (RPM-B) was post-modified by two metal salts and then evaluated for P recovery from aqueous solutions in batch mode. The modified biochar characterization showed that RPM-B impregnation with aluminum and manganese salts led to a significant improvement of their surface properties through the pH-zero charge reduction as well as the specific surface areas and the functional group contents increase. Phosphorus recovery tests indicated that the post-treated biochar with AlCl3 (RPM-B-Al) and with KMnO4 (RPM-B-Mn) exhibited relatively high recovery efficiencies with Langmuir’s adsorption capacities of 23.5 and 8.4 mg g−1, respectively. Kinetics and isothermal data modeling, as well as the in-depth analytical characterization of the post-modified biochars before and after adsorption, indicates that P recovery occurs homogeneously on monolayer surfaces through mainly anion exchange, precipitation, and electrostatic interactions. On the other hand, P desorption efficiency increases with the desorbing solution pH values. The best P desorption yields were observed for an initial pH of 9.0 to 78% and 80% for RPM-B-Al-P and RPM-B-Mn-P, respectively. All these results suggest that RPM-B-Al and RPM-B-Mn could be considered promising materials for phosphorus recovery from wastewaters with a possible reuse in agriculture as potential soil amendments.
- Metal salts
- Phosphorus recovery
- Poultry manure biochar
ASJC Scopus subject areas
- Renewable Energy, Sustainability and the Environment