RF energy harvesting system design for wireless sensors

Maryam Al-Lawati, Manar Al-Busaidi, Zia Nadir

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

This paper describes a method of charging a low power sensor by harvesting RF signals. The paper introduces an integration scheme of the RF harvester consisting of voltage booster and a rectifier to convert the AC voltage to DC voltage. The work presented here focuses on modeling and implementation of a design. Results show good improvement.

Original languageEnglish
Title of host publicationInternational Multi-Conference on Systems, Signals and Devices, SSD 2012 - Summary Proceedings
DOIs
Publication statusPublished - 2012
Event9th International Multi-Conference on Systems, Signals and Devices, SSD 2012 - Chemnitz, Germany
Duration: Mar 20 2012Mar 23 2012

Other

Other9th International Multi-Conference on Systems, Signals and Devices, SSD 2012
CountryGermany
CityChemnitz
Period3/20/123/23/12

    Fingerprint

Keywords

  • Booster Circuits
  • Low Power Sensors
  • RF Energy Harvester
  • RF Signal

ASJC Scopus subject areas

  • Signal Processing
  • Control and Systems Engineering

Cite this

Al-Lawati, M., Al-Busaidi, M., & Nadir, Z. (2012). RF energy harvesting system design for wireless sensors. In International Multi-Conference on Systems, Signals and Devices, SSD 2012 - Summary Proceedings [6197969] https://doi.org/10.1109/SSD.2012.6197969