Recycling of waste spent catalyst in road construction and masonry blocks

Ramzi Taha, Zahran Al-Kamyani, Khalifa Al-Jabri, Mahad Baawain, Khalid Al-Shamsi

Research output: Contribution to journalArticle

13 Citations (Scopus)

Abstract

Waste spent catalyst is generated in Oman as a result of the cracking process of petroleum oil in the Mina Al-Fahl and Sohar Refineries. The disposal of spent catalyst is of a major concern to oil refineries. Stabilized spent catalyst was evaluated for use in road construction as a whole replacement for crushed aggregates in the sub-base and base layers and as a partial replacement for Portland cement in masonry blocks manufacturing. Stabilization is necessary as the waste spent catalyst exists in a powder form and binders are needed to attain the necessary strength required to qualify its use in road construction. Raw spent catalyst was also blended with other virgin aggregates, as a sand or filler replacement, for use in road construction. Compaction, unconfined compressive strength and leaching tests were performed on the stabilized mixtures. For its use in masonry construction, blocks were tested for unconfined compressive strength at various curing periods. Results indicate that the spent catalyst has a promising potential for use in road construction and masonry blocks without causing any negative environmental impacts.

Original languageEnglish
Pages (from-to)122-127
Number of pages6
JournalJournal of Hazardous Materials
Volume229-230
DOIs
Publication statusPublished - Aug 30 2012

Fingerprint

Compressive Strength
Road construction
road construction
masonry
Recycling
Oils
recycling
catalyst
Oman
Catalysts
Petroleum
Powders
replacement
compressive strength
Compressive strength
Masonry construction
Portland cement
Leaching
Binders
Environmental impact

Keywords

  • Masonry
  • Recycling
  • Road
  • Spent catalyst
  • Stabilization

ASJC Scopus subject areas

  • Health, Toxicology and Mutagenesis
  • Pollution
  • Waste Management and Disposal
  • Environmental Chemistry
  • Environmental Engineering

Cite this

Recycling of waste spent catalyst in road construction and masonry blocks. / Taha, Ramzi; Al-Kamyani, Zahran; Al-Jabri, Khalifa; Baawain, Mahad; Al-Shamsi, Khalid.

In: Journal of Hazardous Materials, Vol. 229-230, 30.08.2012, p. 122-127.

Research output: Contribution to journalArticle

@article{c40b015641674486bc7e119437bd907b,
title = "Recycling of waste spent catalyst in road construction and masonry blocks",
abstract = "Waste spent catalyst is generated in Oman as a result of the cracking process of petroleum oil in the Mina Al-Fahl and Sohar Refineries. The disposal of spent catalyst is of a major concern to oil refineries. Stabilized spent catalyst was evaluated for use in road construction as a whole replacement for crushed aggregates in the sub-base and base layers and as a partial replacement for Portland cement in masonry blocks manufacturing. Stabilization is necessary as the waste spent catalyst exists in a powder form and binders are needed to attain the necessary strength required to qualify its use in road construction. Raw spent catalyst was also blended with other virgin aggregates, as a sand or filler replacement, for use in road construction. Compaction, unconfined compressive strength and leaching tests were performed on the stabilized mixtures. For its use in masonry construction, blocks were tested for unconfined compressive strength at various curing periods. Results indicate that the spent catalyst has a promising potential for use in road construction and masonry blocks without causing any negative environmental impacts.",
keywords = "Masonry, Recycling, Road, Spent catalyst, Stabilization",
author = "Ramzi Taha and Zahran Al-Kamyani and Khalifa Al-Jabri and Mahad Baawain and Khalid Al-Shamsi",
year = "2012",
month = "8",
day = "30",
doi = "10.1016/j.jhazmat.2012.05.083",
language = "English",
volume = "229-230",
pages = "122--127",
journal = "Journal of Hazardous Materials",
issn = "0304-3894",
publisher = "Elsevier",

}

TY - JOUR

T1 - Recycling of waste spent catalyst in road construction and masonry blocks

AU - Taha, Ramzi

AU - Al-Kamyani, Zahran

AU - Al-Jabri, Khalifa

AU - Baawain, Mahad

AU - Al-Shamsi, Khalid

PY - 2012/8/30

Y1 - 2012/8/30

N2 - Waste spent catalyst is generated in Oman as a result of the cracking process of petroleum oil in the Mina Al-Fahl and Sohar Refineries. The disposal of spent catalyst is of a major concern to oil refineries. Stabilized spent catalyst was evaluated for use in road construction as a whole replacement for crushed aggregates in the sub-base and base layers and as a partial replacement for Portland cement in masonry blocks manufacturing. Stabilization is necessary as the waste spent catalyst exists in a powder form and binders are needed to attain the necessary strength required to qualify its use in road construction. Raw spent catalyst was also blended with other virgin aggregates, as a sand or filler replacement, for use in road construction. Compaction, unconfined compressive strength and leaching tests were performed on the stabilized mixtures. For its use in masonry construction, blocks were tested for unconfined compressive strength at various curing periods. Results indicate that the spent catalyst has a promising potential for use in road construction and masonry blocks without causing any negative environmental impacts.

AB - Waste spent catalyst is generated in Oman as a result of the cracking process of petroleum oil in the Mina Al-Fahl and Sohar Refineries. The disposal of spent catalyst is of a major concern to oil refineries. Stabilized spent catalyst was evaluated for use in road construction as a whole replacement for crushed aggregates in the sub-base and base layers and as a partial replacement for Portland cement in masonry blocks manufacturing. Stabilization is necessary as the waste spent catalyst exists in a powder form and binders are needed to attain the necessary strength required to qualify its use in road construction. Raw spent catalyst was also blended with other virgin aggregates, as a sand or filler replacement, for use in road construction. Compaction, unconfined compressive strength and leaching tests were performed on the stabilized mixtures. For its use in masonry construction, blocks were tested for unconfined compressive strength at various curing periods. Results indicate that the spent catalyst has a promising potential for use in road construction and masonry blocks without causing any negative environmental impacts.

KW - Masonry

KW - Recycling

KW - Road

KW - Spent catalyst

KW - Stabilization

UR - http://www.scopus.com/inward/record.url?scp=84863846174&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84863846174&partnerID=8YFLogxK

U2 - 10.1016/j.jhazmat.2012.05.083

DO - 10.1016/j.jhazmat.2012.05.083

M3 - Article

VL - 229-230

SP - 122

EP - 127

JO - Journal of Hazardous Materials

JF - Journal of Hazardous Materials

SN - 0304-3894

ER -