Performance analysis of a multiple micro-jet impingements cooling model

A. Husain, N. A. Al-Azri, A. Samad, K. Y. Kim

Research output: Contribution to journalArticle

Abstract

The present study investigates the thermal performance of a multiple micro-jet impingements model for electronics cooling. The fluid flow and heat transport characteristics were investigated for steady incompressible laminar flow by solving three-dimensional (3D) Navier-Stokes equations. Several parallel and staggered micro-jet configurations (ie. inline 2 × 2, 3 × 3 and 4 × 4 jets, and staggered five-jet and 13-jet arrays with the jet diameter to the channel height ratios from 0.25-0.5) were analyzed at various flow rates for the maximum temperature rise, pressure drop, heat-transfer coefficient, thermal resistance, and pumping power characteristics. The parametric investigation was carried out based on the number of jets and the jet diameters at various mass flow rates and jet Reynolds numbers. Temperature uniformity and coefficient of performance were evaluated to find out the trade-off among the various designs investigated in the present study. The maximum temperature rise and the pressure drop decreased with an increase in the number of jets except in the case of staggered five-jet array. A higher temperature uniformity was observed at higher flow rates with a decrease in the coefficient of performance. The performance parameters, such as thermal resistance and pumping power, showed a conflicting nature with respect to design variables (viz. jet diameter to stand-off ratio and interjet spacing or number of jets) at various Reynolds numbers within the laminar regime.

Original languageEnglish
Pages (from-to)58-71
Number of pages14
JournalJournal of Engineering Research
Volume13
Issue number1
Publication statusPublished - 2016

Fingerprint

Cooling
Flow rate
Heat resistance
Pressure drop
Reynolds number
Electronic cooling
Temperature
Laminar flow
Heat transfer coefficients
Navier Stokes equations
Flow of fluids

Keywords

  • Coefficient of performance
  • Heat transfer coefficient
  • Jet impingement
  • Pumping power
  • Temperature uniformity
  • Thermal resistance

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Performance analysis of a multiple micro-jet impingements cooling model. / Husain, A.; Al-Azri, N. A.; Samad, A.; Kim, K. Y.

In: Journal of Engineering Research, Vol. 13, No. 1, 2016, p. 58-71.

Research output: Contribution to journalArticle

@article{990f511dd2fc46119b63566769c2cd36,
title = "Performance analysis of a multiple micro-jet impingements cooling model",
abstract = "The present study investigates the thermal performance of a multiple micro-jet impingements model for electronics cooling. The fluid flow and heat transport characteristics were investigated for steady incompressible laminar flow by solving three-dimensional (3D) Navier-Stokes equations. Several parallel and staggered micro-jet configurations (ie. inline 2 × 2, 3 × 3 and 4 × 4 jets, and staggered five-jet and 13-jet arrays with the jet diameter to the channel height ratios from 0.25-0.5) were analyzed at various flow rates for the maximum temperature rise, pressure drop, heat-transfer coefficient, thermal resistance, and pumping power characteristics. The parametric investigation was carried out based on the number of jets and the jet diameters at various mass flow rates and jet Reynolds numbers. Temperature uniformity and coefficient of performance were evaluated to find out the trade-off among the various designs investigated in the present study. The maximum temperature rise and the pressure drop decreased with an increase in the number of jets except in the case of staggered five-jet array. A higher temperature uniformity was observed at higher flow rates with a decrease in the coefficient of performance. The performance parameters, such as thermal resistance and pumping power, showed a conflicting nature with respect to design variables (viz. jet diameter to stand-off ratio and interjet spacing or number of jets) at various Reynolds numbers within the laminar regime.",
keywords = "Coefficient of performance, Heat transfer coefficient, Jet impingement, Pumping power, Temperature uniformity, Thermal resistance",
author = "A. Husain and Al-Azri, {N. A.} and A. Samad and Kim, {K. Y.}",
year = "2016",
language = "English",
volume = "13",
pages = "58--71",
journal = "Journal of Engineering Research",
issn = "1726-6009",
publisher = "Sultan Qaboos University",
number = "1",

}

TY - JOUR

T1 - Performance analysis of a multiple micro-jet impingements cooling model

AU - Husain, A.

AU - Al-Azri, N. A.

AU - Samad, A.

AU - Kim, K. Y.

PY - 2016

Y1 - 2016

N2 - The present study investigates the thermal performance of a multiple micro-jet impingements model for electronics cooling. The fluid flow and heat transport characteristics were investigated for steady incompressible laminar flow by solving three-dimensional (3D) Navier-Stokes equations. Several parallel and staggered micro-jet configurations (ie. inline 2 × 2, 3 × 3 and 4 × 4 jets, and staggered five-jet and 13-jet arrays with the jet diameter to the channel height ratios from 0.25-0.5) were analyzed at various flow rates for the maximum temperature rise, pressure drop, heat-transfer coefficient, thermal resistance, and pumping power characteristics. The parametric investigation was carried out based on the number of jets and the jet diameters at various mass flow rates and jet Reynolds numbers. Temperature uniformity and coefficient of performance were evaluated to find out the trade-off among the various designs investigated in the present study. The maximum temperature rise and the pressure drop decreased with an increase in the number of jets except in the case of staggered five-jet array. A higher temperature uniformity was observed at higher flow rates with a decrease in the coefficient of performance. The performance parameters, such as thermal resistance and pumping power, showed a conflicting nature with respect to design variables (viz. jet diameter to stand-off ratio and interjet spacing or number of jets) at various Reynolds numbers within the laminar regime.

AB - The present study investigates the thermal performance of a multiple micro-jet impingements model for electronics cooling. The fluid flow and heat transport characteristics were investigated for steady incompressible laminar flow by solving three-dimensional (3D) Navier-Stokes equations. Several parallel and staggered micro-jet configurations (ie. inline 2 × 2, 3 × 3 and 4 × 4 jets, and staggered five-jet and 13-jet arrays with the jet diameter to the channel height ratios from 0.25-0.5) were analyzed at various flow rates for the maximum temperature rise, pressure drop, heat-transfer coefficient, thermal resistance, and pumping power characteristics. The parametric investigation was carried out based on the number of jets and the jet diameters at various mass flow rates and jet Reynolds numbers. Temperature uniformity and coefficient of performance were evaluated to find out the trade-off among the various designs investigated in the present study. The maximum temperature rise and the pressure drop decreased with an increase in the number of jets except in the case of staggered five-jet array. A higher temperature uniformity was observed at higher flow rates with a decrease in the coefficient of performance. The performance parameters, such as thermal resistance and pumping power, showed a conflicting nature with respect to design variables (viz. jet diameter to stand-off ratio and interjet spacing or number of jets) at various Reynolds numbers within the laminar regime.

KW - Coefficient of performance

KW - Heat transfer coefficient

KW - Jet impingement

KW - Pumping power

KW - Temperature uniformity

KW - Thermal resistance

UR - http://www.scopus.com/inward/record.url?scp=84990940916&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84990940916&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84990940916

VL - 13

SP - 58

EP - 71

JO - Journal of Engineering Research

JF - Journal of Engineering Research

SN - 1726-6009

IS - 1

ER -