Optimization of mover acceleration in DC tubular linear direct-drive machine using response surface method

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

This paper presents a new analytical model for both magnetic flux density and thrust force in a linear direct-drive machine. The model is then used to design a tubular linear direct drive machine (TLDDM) by optimizing its effective parameters. Although the machine has many applications when it works as a motor, but the same design can be used when it works as a generator, where it has applications in renewable energy and sustainable systems. Twodimensional finite element method (FEM) is used for numerical analysis. Magnetic flux density and thrust force computed numerically shows a good agreement with the values resulted from proposed analytical model. This research, investigates the effect of some geometrical dimensions of Tubular Linear Direct-Drive Machine (TLDDM). The sensitivity analysis of parameters by response surface method (RSM) highlights the influence of effective parameters and their interactions. Permanent magnet (PM) radius, PM length, air gap, coil thickness, and current density of phases are effective factors on Mover’s acceleration. It is found that lower air gap, higher coil thickness and longer PM cause higher ratio of maximum thrust force to mover’s mass. It is shown that RSM can predict the optimum acceleration with error of 6%. The general shape of thrust force in different current densities is also confirmed by experimental results.

Original languageEnglish
Pages (from-to)492-500
Number of pages9
JournalInternational Review of Electrical Engineering
Volume10
Issue number4
Publication statusPublished - 2015

Fingerprint

Permanent magnets
Magnetic flux
Analytical models
Current density
Air
Sensitivity analysis
Numerical analysis
Finite element method

Keywords

  • Analytical Analysis
  • DC tubular linear direct-drive motor
  • Finite element method (FEM)
  • Response surface method (RSM)

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

@article{8c257a9337154dc3950e80809badb4a5,
title = "Optimization of mover acceleration in DC tubular linear direct-drive machine using response surface method",
abstract = "This paper presents a new analytical model for both magnetic flux density and thrust force in a linear direct-drive machine. The model is then used to design a tubular linear direct drive machine (TLDDM) by optimizing its effective parameters. Although the machine has many applications when it works as a motor, but the same design can be used when it works as a generator, where it has applications in renewable energy and sustainable systems. Twodimensional finite element method (FEM) is used for numerical analysis. Magnetic flux density and thrust force computed numerically shows a good agreement with the values resulted from proposed analytical model. This research, investigates the effect of some geometrical dimensions of Tubular Linear Direct-Drive Machine (TLDDM). The sensitivity analysis of parameters by response surface method (RSM) highlights the influence of effective parameters and their interactions. Permanent magnet (PM) radius, PM length, air gap, coil thickness, and current density of phases are effective factors on Mover’s acceleration. It is found that lower air gap, higher coil thickness and longer PM cause higher ratio of maximum thrust force to mover’s mass. It is shown that RSM can predict the optimum acceleration with error of 6{\%}. The general shape of thrust force in different current densities is also confirmed by experimental results.",
keywords = "Analytical Analysis, DC tubular linear direct-drive motor, Finite element method (FEM), Response surface method (RSM)",
author = "Mojtaba Ghodsi",
year = "2015",
language = "English",
volume = "10",
pages = "492--500",
journal = "International Review of Electrical Engineering",
issn = "1827-6660",
publisher = "Praise Worthy Prize",
number = "4",

}

TY - JOUR

T1 - Optimization of mover acceleration in DC tubular linear direct-drive machine using response surface method

AU - Ghodsi, Mojtaba

PY - 2015

Y1 - 2015

N2 - This paper presents a new analytical model for both magnetic flux density and thrust force in a linear direct-drive machine. The model is then used to design a tubular linear direct drive machine (TLDDM) by optimizing its effective parameters. Although the machine has many applications when it works as a motor, but the same design can be used when it works as a generator, where it has applications in renewable energy and sustainable systems. Twodimensional finite element method (FEM) is used for numerical analysis. Magnetic flux density and thrust force computed numerically shows a good agreement with the values resulted from proposed analytical model. This research, investigates the effect of some geometrical dimensions of Tubular Linear Direct-Drive Machine (TLDDM). The sensitivity analysis of parameters by response surface method (RSM) highlights the influence of effective parameters and their interactions. Permanent magnet (PM) radius, PM length, air gap, coil thickness, and current density of phases are effective factors on Mover’s acceleration. It is found that lower air gap, higher coil thickness and longer PM cause higher ratio of maximum thrust force to mover’s mass. It is shown that RSM can predict the optimum acceleration with error of 6%. The general shape of thrust force in different current densities is also confirmed by experimental results.

AB - This paper presents a new analytical model for both magnetic flux density and thrust force in a linear direct-drive machine. The model is then used to design a tubular linear direct drive machine (TLDDM) by optimizing its effective parameters. Although the machine has many applications when it works as a motor, but the same design can be used when it works as a generator, where it has applications in renewable energy and sustainable systems. Twodimensional finite element method (FEM) is used for numerical analysis. Magnetic flux density and thrust force computed numerically shows a good agreement with the values resulted from proposed analytical model. This research, investigates the effect of some geometrical dimensions of Tubular Linear Direct-Drive Machine (TLDDM). The sensitivity analysis of parameters by response surface method (RSM) highlights the influence of effective parameters and their interactions. Permanent magnet (PM) radius, PM length, air gap, coil thickness, and current density of phases are effective factors on Mover’s acceleration. It is found that lower air gap, higher coil thickness and longer PM cause higher ratio of maximum thrust force to mover’s mass. It is shown that RSM can predict the optimum acceleration with error of 6%. The general shape of thrust force in different current densities is also confirmed by experimental results.

KW - Analytical Analysis

KW - DC tubular linear direct-drive motor

KW - Finite element method (FEM)

KW - Response surface method (RSM)

UR - http://www.scopus.com/inward/record.url?scp=84943656312&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84943656312&partnerID=8YFLogxK

M3 - Article

VL - 10

SP - 492

EP - 500

JO - International Review of Electrical Engineering

JF - International Review of Electrical Engineering

SN - 1827-6660

IS - 4

ER -