Multi-class optical-CDMA network using optical power control

N. Tarhuni, M. Elmusrati, T. Korhonen

Research output: Contribution to journalArticle

10 Citations (Scopus)

Abstract

In this paper we use optical power control to support multirate transmission over temporal optical CDMA networks. We apply the centralized power control algorithm to set the transmit power of the users' optical sources in order to satisfy a given target QoS. In addition, optical amplifiers are included to enhance the overall system performance while the Amplified Spontaneous Emission (ASE) is considered as the main noise source. The objective function defined as the sum of the transmitted optical power from all nodes is minimized subject to a signal-to-interference (SIR) constraint. Moreover, the network feasibility, defined as the ability to evaluate a power vector that satisfy the target SIR, is discussed in terms of the spectral radius of the network interference matrix. Next, the spectral radius of the network interference matrix is investigated and modeled as a truncated Gaussian distribution. Last, a rate reduction algorithm, categorized in terms of the number of nodes involved in the process of rate reduction, is proposed to increase the network feasibility. As more nodes are added to the rate reduction campaign, the network feasibility is significantly enhanced. For typical network parameters we find by simulating 104 random network realizations that a three-node rate reduction results in 99% network feasibility.

Original languageEnglish
Pages (from-to)279-292
Number of pages14
JournalProgress in Electromagnetics Research
Volume64
Publication statusPublished - 2006

Fingerprint

code division multiple access
Fiber optic networks
Power control
Code division multiple access
Light amplifiers
interference
Spontaneous emission
Gaussian distribution
Light sources
Quality of service
radii
matrices
normal density functions
light amplifiers
spontaneous emission

ASJC Scopus subject areas

  • Radiation
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Cite this

Multi-class optical-CDMA network using optical power control. / Tarhuni, N.; Elmusrati, M.; Korhonen, T.

In: Progress in Electromagnetics Research, Vol. 64, 2006, p. 279-292.

Research output: Contribution to journalArticle

@article{8c7858f27abb4e2594ad73b809636dd4,
title = "Multi-class optical-CDMA network using optical power control",
abstract = "In this paper we use optical power control to support multirate transmission over temporal optical CDMA networks. We apply the centralized power control algorithm to set the transmit power of the users' optical sources in order to satisfy a given target QoS. In addition, optical amplifiers are included to enhance the overall system performance while the Amplified Spontaneous Emission (ASE) is considered as the main noise source. The objective function defined as the sum of the transmitted optical power from all nodes is minimized subject to a signal-to-interference (SIR) constraint. Moreover, the network feasibility, defined as the ability to evaluate a power vector that satisfy the target SIR, is discussed in terms of the spectral radius of the network interference matrix. Next, the spectral radius of the network interference matrix is investigated and modeled as a truncated Gaussian distribution. Last, a rate reduction algorithm, categorized in terms of the number of nodes involved in the process of rate reduction, is proposed to increase the network feasibility. As more nodes are added to the rate reduction campaign, the network feasibility is significantly enhanced. For typical network parameters we find by simulating 104 random network realizations that a three-node rate reduction results in 99{\%} network feasibility.",
author = "N. Tarhuni and M. Elmusrati and T. Korhonen",
year = "2006",
language = "English",
volume = "64",
pages = "279--292",
journal = "Progress in Electromagnetics Research",
issn = "1070-4698",
publisher = "Electromagnetics Academy",

}

TY - JOUR

T1 - Multi-class optical-CDMA network using optical power control

AU - Tarhuni, N.

AU - Elmusrati, M.

AU - Korhonen, T.

PY - 2006

Y1 - 2006

N2 - In this paper we use optical power control to support multirate transmission over temporal optical CDMA networks. We apply the centralized power control algorithm to set the transmit power of the users' optical sources in order to satisfy a given target QoS. In addition, optical amplifiers are included to enhance the overall system performance while the Amplified Spontaneous Emission (ASE) is considered as the main noise source. The objective function defined as the sum of the transmitted optical power from all nodes is minimized subject to a signal-to-interference (SIR) constraint. Moreover, the network feasibility, defined as the ability to evaluate a power vector that satisfy the target SIR, is discussed in terms of the spectral radius of the network interference matrix. Next, the spectral radius of the network interference matrix is investigated and modeled as a truncated Gaussian distribution. Last, a rate reduction algorithm, categorized in terms of the number of nodes involved in the process of rate reduction, is proposed to increase the network feasibility. As more nodes are added to the rate reduction campaign, the network feasibility is significantly enhanced. For typical network parameters we find by simulating 104 random network realizations that a three-node rate reduction results in 99% network feasibility.

AB - In this paper we use optical power control to support multirate transmission over temporal optical CDMA networks. We apply the centralized power control algorithm to set the transmit power of the users' optical sources in order to satisfy a given target QoS. In addition, optical amplifiers are included to enhance the overall system performance while the Amplified Spontaneous Emission (ASE) is considered as the main noise source. The objective function defined as the sum of the transmitted optical power from all nodes is minimized subject to a signal-to-interference (SIR) constraint. Moreover, the network feasibility, defined as the ability to evaluate a power vector that satisfy the target SIR, is discussed in terms of the spectral radius of the network interference matrix. Next, the spectral radius of the network interference matrix is investigated and modeled as a truncated Gaussian distribution. Last, a rate reduction algorithm, categorized in terms of the number of nodes involved in the process of rate reduction, is proposed to increase the network feasibility. As more nodes are added to the rate reduction campaign, the network feasibility is significantly enhanced. For typical network parameters we find by simulating 104 random network realizations that a three-node rate reduction results in 99% network feasibility.

UR - http://www.scopus.com/inward/record.url?scp=33947166751&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33947166751&partnerID=8YFLogxK

M3 - Article

VL - 64

SP - 279

EP - 292

JO - Progress in Electromagnetics Research

JF - Progress in Electromagnetics Research

SN - 1070-4698

ER -