Investigating uncertainties in relative permeability measurements

F. H. Boukadi, A. S. Bemani, T. Babadagli

Research output: Contribution to specialist publicationArticle

5 Citations (Scopus)

Abstract

In this article, relative permeability measurement methods for water-oil systems mimicking displacement processes in porous media when reservoir pressure is supported by an active aquifer or a water injection scheme are compared. The measurement methods are compared within the context of reservoir wettability. It is suggested that for reservoirs with predominant water-wetness, unsteady-state experiments could be run under the suggested Peters and Khataniar (1987) stability criteria. Steady-state experiments could also be run for comparative and in turn quality control purposes. In addition, a combination of unsteady-, steady-state and centrifugal experiments could be adopted to generate trustful results for reservoirs with intermediate wettability, but only if one has a reliable initial relative permeability to oil (kro) at a representative initial water saturation (Swi). As such, it is recommended to use an unsteady-state technique for the initiation of the displacement experiments, a steady-state method for mid-range saturations, and the centrifuge for tail-end saturations. It should be noted that for the centrifugal method, comparable centrifugal and viscous forces are required to mimic displacement processes. Coyne's procedure could also be used for comparative and quality control purposes.

Original languageEnglish
Pages719-728
Number of pages10
Volume27
No.8
Specialist publicationEnergy Sources
DOIs
Publication statusPublished - 2005

Fingerprint

Quality control
Wetting
Water
Oils
Experiments
Water injection
Centrifuges
Stability criteria
Aquifers
Porous materials
Uncertainty

Keywords

  • Measurement methods
  • Relative permeability
  • Uncertainties
  • Water-oil systems
  • Wettability

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Fuel Technology
  • Energy Engineering and Power Technology

Cite this

Investigating uncertainties in relative permeability measurements. / Boukadi, F. H.; Bemani, A. S.; Babadagli, T.

In: Energy Sources, Vol. 27, No. 8, 2005, p. 719-728.

Research output: Contribution to specialist publicationArticle

Boukadi, F. H. ; Bemani, A. S. ; Babadagli, T. / Investigating uncertainties in relative permeability measurements. In: Energy Sources. 2005 ; Vol. 27, No. 8. pp. 719-728.
@misc{6f0d8ae82c5f4fc28a67685704408cb9,
title = "Investigating uncertainties in relative permeability measurements",
abstract = "In this article, relative permeability measurement methods for water-oil systems mimicking displacement processes in porous media when reservoir pressure is supported by an active aquifer or a water injection scheme are compared. The measurement methods are compared within the context of reservoir wettability. It is suggested that for reservoirs with predominant water-wetness, unsteady-state experiments could be run under the suggested Peters and Khataniar (1987) stability criteria. Steady-state experiments could also be run for comparative and in turn quality control purposes. In addition, a combination of unsteady-, steady-state and centrifugal experiments could be adopted to generate trustful results for reservoirs with intermediate wettability, but only if one has a reliable initial relative permeability to oil (kro) at a representative initial water saturation (Swi). As such, it is recommended to use an unsteady-state technique for the initiation of the displacement experiments, a steady-state method for mid-range saturations, and the centrifuge for tail-end saturations. It should be noted that for the centrifugal method, comparable centrifugal and viscous forces are required to mimic displacement processes. Coyne's procedure could also be used for comparative and quality control purposes.",
keywords = "Measurement methods, Relative permeability, Uncertainties, Water-oil systems, Wettability",
author = "Boukadi, {F. H.} and Bemani, {A. S.} and T. Babadagli",
year = "2005",
doi = "10.1080/00908310490450638",
language = "English",
volume = "27",
pages = "719--728",
journal = "Energy Sources",
issn = "0090-8312",
publisher = "Taylor and Francis Ltd.",

}

TY - GEN

T1 - Investigating uncertainties in relative permeability measurements

AU - Boukadi, F. H.

AU - Bemani, A. S.

AU - Babadagli, T.

PY - 2005

Y1 - 2005

N2 - In this article, relative permeability measurement methods for water-oil systems mimicking displacement processes in porous media when reservoir pressure is supported by an active aquifer or a water injection scheme are compared. The measurement methods are compared within the context of reservoir wettability. It is suggested that for reservoirs with predominant water-wetness, unsteady-state experiments could be run under the suggested Peters and Khataniar (1987) stability criteria. Steady-state experiments could also be run for comparative and in turn quality control purposes. In addition, a combination of unsteady-, steady-state and centrifugal experiments could be adopted to generate trustful results for reservoirs with intermediate wettability, but only if one has a reliable initial relative permeability to oil (kro) at a representative initial water saturation (Swi). As such, it is recommended to use an unsteady-state technique for the initiation of the displacement experiments, a steady-state method for mid-range saturations, and the centrifuge for tail-end saturations. It should be noted that for the centrifugal method, comparable centrifugal and viscous forces are required to mimic displacement processes. Coyne's procedure could also be used for comparative and quality control purposes.

AB - In this article, relative permeability measurement methods for water-oil systems mimicking displacement processes in porous media when reservoir pressure is supported by an active aquifer or a water injection scheme are compared. The measurement methods are compared within the context of reservoir wettability. It is suggested that for reservoirs with predominant water-wetness, unsteady-state experiments could be run under the suggested Peters and Khataniar (1987) stability criteria. Steady-state experiments could also be run for comparative and in turn quality control purposes. In addition, a combination of unsteady-, steady-state and centrifugal experiments could be adopted to generate trustful results for reservoirs with intermediate wettability, but only if one has a reliable initial relative permeability to oil (kro) at a representative initial water saturation (Swi). As such, it is recommended to use an unsteady-state technique for the initiation of the displacement experiments, a steady-state method for mid-range saturations, and the centrifuge for tail-end saturations. It should be noted that for the centrifugal method, comparable centrifugal and viscous forces are required to mimic displacement processes. Coyne's procedure could also be used for comparative and quality control purposes.

KW - Measurement methods

KW - Relative permeability

KW - Uncertainties

KW - Water-oil systems

KW - Wettability

UR - http://www.scopus.com/inward/record.url?scp=19644382803&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=19644382803&partnerID=8YFLogxK

U2 - 10.1080/00908310490450638

DO - 10.1080/00908310490450638

M3 - Article

AN - SCOPUS:19644382803

VL - 27

SP - 719

EP - 728

JO - Energy Sources

JF - Energy Sources

SN - 0090-8312

ER -