High efficiency switching mode class-E power amplifier design improvements for RF

Ameera Yahyai; Iman Raisi; Fatema Sheryani; Marwa Hooti; Farid Touati; Zia Nadir

doi:10.1109/SCORED.2009.5443430

High efficiency switching mode class-E power amplifier design improvements for RF

Ameera Yahyai^*, Iman Raisi, Fatema Sheryani, Marwa Hooti, Farid Touati, Zia Nadir

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

4 Citations (Scopus)

Abstract

Efficient power amplifiers are essentially needed in portable battery-operated systems such as mobile phones because the power amplifier is the most power consuming building blocks in the transmitter of these portable systems. This paper presents efficient techniques to increase the efficiency of the power amplifier as much as possible by degrading the power dissipation of the transistor in the mobile battery since the power loss in the transistor is a very critical issue in the mobiles. . This paper includes also the simulation results to test the matching network for different GSM frequencies 850MHZ, 900MHz, 1800MHz and 1900MHz. Much improvement in terms of higher efficiencies is achieved.

Original language	English
Title of host publication	SCOReD2009 - Proceedings of 2009 IEEE Student Conference on Research and Development
Pages	1-4
Number of pages	4
DOIs	https://doi.org/10.1109/SCORED.2009.5443430
Publication status	Published - 2009
Externally published	Yes
Event	2009 IEEE Student Conference on Research and Development, SCOReD2009 - Serdang, Malaysia Duration: Nov 16 2009 → Nov 18 2009

Publication series

Name	SCOReD2009 - Proceedings of 2009 IEEE Student Conference on Research and Development

Other

Other	2009 IEEE Student Conference on Research and Development, SCOReD2009
Country/Territory	Malaysia
City	Serdang
Period	11/16/09 → 11/18/09

Keywords

Class-E power amplifier
High efficiency
RF
Switching mode

ASJC Scopus subject areas

Biomedical Engineering
Control and Systems Engineering
Electrical and Electronic Engineering

Access to Document

10.1109/SCORED.2009.5443430

Cite this

Yahyai, A., Raisi, I., Sheryani, F., Hooti, M., Touati, F., & Nadir, Z. (2009). High efficiency switching mode class-E power amplifier design improvements for RF. In SCOReD2009 - Proceedings of 2009 IEEE Student Conference on Research and Development (pp. 1-4). Article 5443430 (SCOReD2009 - Proceedings of 2009 IEEE Student Conference on Research and Development). https://doi.org/10.1109/SCORED.2009.5443430

High efficiency switching mode class-E power amplifier design improvements for RF. / Yahyai, Ameera; Raisi, Iman; Sheryani, Fatema et al.
SCOReD2009 - Proceedings of 2009 IEEE Student Conference on Research and Development. 2009. p. 1-4 5443430 (SCOReD2009 - Proceedings of 2009 IEEE Student Conference on Research and Development).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Yahyai, A, Raisi, I, Sheryani, F, Hooti, M, Touati, F & Nadir, Z 2009, High efficiency switching mode class-E power amplifier design improvements for RF. in SCOReD2009 - Proceedings of 2009 IEEE Student Conference on Research and Development., 5443430, SCOReD2009 - Proceedings of 2009 IEEE Student Conference on Research and Development, pp. 1-4, 2009 IEEE Student Conference on Research and Development, SCOReD2009, Serdang, Malaysia, 11/16/09. https://doi.org/10.1109/SCORED.2009.5443430

Yahyai A, Raisi I, Sheryani F, Hooti M, Touati F, Nadir Z. High efficiency switching mode class-E power amplifier design improvements for RF. In SCOReD2009 - Proceedings of 2009 IEEE Student Conference on Research and Development. 2009. p. 1-4. 5443430. (SCOReD2009 - Proceedings of 2009 IEEE Student Conference on Research and Development). doi: 10.1109/SCORED.2009.5443430

@inproceedings{d37b161f198448418caf5c1d4bd5fa88,

title = "High efficiency switching mode class-E power amplifier design improvements for RF",

abstract = "Efficient power amplifiers are essentially needed in portable battery-operated systems such as mobile phones because the power amplifier is the most power consuming building blocks in the transmitter of these portable systems. This paper presents efficient techniques to increase the efficiency of the power amplifier as much as possible by degrading the power dissipation of the transistor in the mobile battery since the power loss in the transistor is a very critical issue in the mobiles. . This paper includes also the simulation results to test the matching network for different GSM frequencies 850MHZ, 900MHz, 1800MHz and 1900MHz. Much improvement in terms of higher efficiencies is achieved.",

keywords = "Class-E power amplifier, High efficiency, RF, Switching mode",

author = "Ameera Yahyai and Iman Raisi and Fatema Sheryani and Marwa Hooti and Farid Touati and Zia Nadir",

year = "2009",

doi = "10.1109/SCORED.2009.5443430",

language = "English",

isbn = "9781424451876",

series = "SCOReD2009 - Proceedings of 2009 IEEE Student Conference on Research and Development",

pages = "1--4",

booktitle = "SCOReD2009 - Proceedings of 2009 IEEE Student Conference on Research and Development",

note = "2009 IEEE Student Conference on Research and Development, SCOReD2009 ; Conference date: 16-11-2009 Through 18-11-2009",

}

TY - GEN

T1 - High efficiency switching mode class-E power amplifier design improvements for RF

AU - Yahyai, Ameera

AU - Raisi, Iman

AU - Sheryani, Fatema

AU - Hooti, Marwa

AU - Touati, Farid

AU - Nadir, Zia

PY - 2009

Y1 - 2009

N2 - Efficient power amplifiers are essentially needed in portable battery-operated systems such as mobile phones because the power amplifier is the most power consuming building blocks in the transmitter of these portable systems. This paper presents efficient techniques to increase the efficiency of the power amplifier as much as possible by degrading the power dissipation of the transistor in the mobile battery since the power loss in the transistor is a very critical issue in the mobiles. . This paper includes also the simulation results to test the matching network for different GSM frequencies 850MHZ, 900MHz, 1800MHz and 1900MHz. Much improvement in terms of higher efficiencies is achieved.

AB - Efficient power amplifiers are essentially needed in portable battery-operated systems such as mobile phones because the power amplifier is the most power consuming building blocks in the transmitter of these portable systems. This paper presents efficient techniques to increase the efficiency of the power amplifier as much as possible by degrading the power dissipation of the transistor in the mobile battery since the power loss in the transistor is a very critical issue in the mobiles. . This paper includes also the simulation results to test the matching network for different GSM frequencies 850MHZ, 900MHz, 1800MHz and 1900MHz. Much improvement in terms of higher efficiencies is achieved.

KW - Class-E power amplifier

KW - High efficiency

KW - RF

KW - Switching mode

UR - http://www.scopus.com/inward/record.url?scp=77952647135&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77952647135&partnerID=8YFLogxK

U2 - 10.1109/SCORED.2009.5443430

DO - 10.1109/SCORED.2009.5443430

M3 - Conference contribution

AN - SCOPUS:77952647135

SN - 9781424451876

T3 - SCOReD2009 - Proceedings of 2009 IEEE Student Conference on Research and Development

SP - 1

EP - 4

BT - SCOReD2009 - Proceedings of 2009 IEEE Student Conference on Research and Development

T2 - 2009 IEEE Student Conference on Research and Development, SCOReD2009

Y2 - 16 November 2009 through 18 November 2009

ER -

High efficiency switching mode class-E power amplifier design improvements for RF

Abstract

Publication series

Other

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this