EXPERIMENTAL STUDY on the EFFECT of DRILL QUALITY on BONE TEMPERATURE in DRILLING

Khurshid Alam, Syed Husain Imran, Abdullah Al-Shabibi, Mojtaba Ghodsi, Vadim Silberschmidth

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Bone drilling is widely performed in orthopedics for fixation and reconstruction of bone. In bone drilling, a hard metallic drill penetrates into the bone tissue which may cause trauma. Shear deformation of the bone material and friction between the drill and bone may induce elevated temperature in bone tissue. Temperature above a certain level may seriously harm the tissue, leading to several postoperative complications. The purpose of the current study is to measure and compare temperature in bone drilling using sharp and worn drill. Drilling tests were performed on cortical bone obtained from femoral shaft of a cow. A parametric study was conducted to quantify bone temperature using a range of drilling speeds and feed rates using drills having sharp and worn cutting edges with and without cooling environment. The temperature was measured using thermocouples, and wear of the cutting edges of the drill was measured using a scanning profilometer. Experimental results demonstrated lower temperature in bone using a sharp drill compared with a worn drill for similar drilling conditions. The bone temperature was found to rise with drill rotational speed, rate of penetration and size of the drill with and without cooling. Blunt drills were found more crucial for inducing thermal necrosis in bone.

Original languageEnglish
Article number1850018
JournalBiomedical Engineering - Applications, Basis and Communications
Volume30
Issue number2
DOIs
Publication statusPublished - Apr 1 2018

Fingerprint

Mandrillus
Bone
Bone and Bones
Drilling
Temperature
Tissue
Osteonecrosis
Friction
Cooling
Thigh
Orthopedics
Thermocouples
Shear deformation
Hot Temperature

Keywords

  • Bone drilling
  • Drill wear
  • Drilling temperatures
  • Orthopedics

ASJC Scopus subject areas

  • Biophysics
  • Bioengineering
  • Biomedical Engineering

Cite this

EXPERIMENTAL STUDY on the EFFECT of DRILL QUALITY on BONE TEMPERATURE in DRILLING. / Alam, Khurshid; Imran, Syed Husain; Al-Shabibi, Abdullah; Ghodsi, Mojtaba; Silberschmidth, Vadim.

In: Biomedical Engineering - Applications, Basis and Communications, Vol. 30, No. 2, 1850018, 01.04.2018.

Research output: Contribution to journalArticle

@article{8154124fe9674fd699b0cf280c372072,
title = "EXPERIMENTAL STUDY on the EFFECT of DRILL QUALITY on BONE TEMPERATURE in DRILLING",
abstract = "Bone drilling is widely performed in orthopedics for fixation and reconstruction of bone. In bone drilling, a hard metallic drill penetrates into the bone tissue which may cause trauma. Shear deformation of the bone material and friction between the drill and bone may induce elevated temperature in bone tissue. Temperature above a certain level may seriously harm the tissue, leading to several postoperative complications. The purpose of the current study is to measure and compare temperature in bone drilling using sharp and worn drill. Drilling tests were performed on cortical bone obtained from femoral shaft of a cow. A parametric study was conducted to quantify bone temperature using a range of drilling speeds and feed rates using drills having sharp and worn cutting edges with and without cooling environment. The temperature was measured using thermocouples, and wear of the cutting edges of the drill was measured using a scanning profilometer. Experimental results demonstrated lower temperature in bone using a sharp drill compared with a worn drill for similar drilling conditions. The bone temperature was found to rise with drill rotational speed, rate of penetration and size of the drill with and without cooling. Blunt drills were found more crucial for inducing thermal necrosis in bone.",
keywords = "Bone drilling, Drill wear, Drilling temperatures, Orthopedics",
author = "Khurshid Alam and Imran, {Syed Husain} and Abdullah Al-Shabibi and Mojtaba Ghodsi and Vadim Silberschmidth",
year = "2018",
month = "4",
day = "1",
doi = "10.4015/S1016237218500187",
language = "English",
volume = "30",
journal = "Biomedical Engineering - Applications, Basis and Communications",
issn = "1016-2372",
publisher = "World Scientific Publishing Co. Pte Ltd",
number = "2",

}

TY - JOUR

T1 - EXPERIMENTAL STUDY on the EFFECT of DRILL QUALITY on BONE TEMPERATURE in DRILLING

AU - Alam, Khurshid

AU - Imran, Syed Husain

AU - Al-Shabibi, Abdullah

AU - Ghodsi, Mojtaba

AU - Silberschmidth, Vadim

PY - 2018/4/1

Y1 - 2018/4/1

N2 - Bone drilling is widely performed in orthopedics for fixation and reconstruction of bone. In bone drilling, a hard metallic drill penetrates into the bone tissue which may cause trauma. Shear deformation of the bone material and friction between the drill and bone may induce elevated temperature in bone tissue. Temperature above a certain level may seriously harm the tissue, leading to several postoperative complications. The purpose of the current study is to measure and compare temperature in bone drilling using sharp and worn drill. Drilling tests were performed on cortical bone obtained from femoral shaft of a cow. A parametric study was conducted to quantify bone temperature using a range of drilling speeds and feed rates using drills having sharp and worn cutting edges with and without cooling environment. The temperature was measured using thermocouples, and wear of the cutting edges of the drill was measured using a scanning profilometer. Experimental results demonstrated lower temperature in bone using a sharp drill compared with a worn drill for similar drilling conditions. The bone temperature was found to rise with drill rotational speed, rate of penetration and size of the drill with and without cooling. Blunt drills were found more crucial for inducing thermal necrosis in bone.

AB - Bone drilling is widely performed in orthopedics for fixation and reconstruction of bone. In bone drilling, a hard metallic drill penetrates into the bone tissue which may cause trauma. Shear deformation of the bone material and friction between the drill and bone may induce elevated temperature in bone tissue. Temperature above a certain level may seriously harm the tissue, leading to several postoperative complications. The purpose of the current study is to measure and compare temperature in bone drilling using sharp and worn drill. Drilling tests were performed on cortical bone obtained from femoral shaft of a cow. A parametric study was conducted to quantify bone temperature using a range of drilling speeds and feed rates using drills having sharp and worn cutting edges with and without cooling environment. The temperature was measured using thermocouples, and wear of the cutting edges of the drill was measured using a scanning profilometer. Experimental results demonstrated lower temperature in bone using a sharp drill compared with a worn drill for similar drilling conditions. The bone temperature was found to rise with drill rotational speed, rate of penetration and size of the drill with and without cooling. Blunt drills were found more crucial for inducing thermal necrosis in bone.

KW - Bone drilling

KW - Drill wear

KW - Drilling temperatures

KW - Orthopedics

UR - http://www.scopus.com/inward/record.url?scp=85042801436&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85042801436&partnerID=8YFLogxK

U2 - 10.4015/S1016237218500187

DO - 10.4015/S1016237218500187

M3 - Article

AN - SCOPUS:85042801436

VL - 30

JO - Biomedical Engineering - Applications, Basis and Communications

JF - Biomedical Engineering - Applications, Basis and Communications

SN - 1016-2372

IS - 2

M1 - 1850018

ER -