Effect of organic solvents and acidic catalysts on biodiesel yields from primary sewage sludge, and characterization of fuel properties

Mohamed A. Gomaa, Nicolas Gombocz, Dominik Schild, Farouk Mjalli, Ahmed Al-Harrasi, Raeid Abed

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Biodiesel is considered the most convenient biofuel, due to its direct use in existing combustion engines; however, its production is not economically optimal due to processes that utilize costly substrates, require high energy expenditure or achieve low biodiesel yields. We used primary sewage sludge for the production of biodiesel and compared yields at different temperatures (40, 50 and 60 °C) and with different organic solvents (chloroform, toluene and hexane), acid catalysts (HCl and H2SO4) and catalyst concentrations (3, 5 and 7%). A maximum of 18 wt% biodiesel was obtained using chloroform with 3% H2SO4 at 40 °C. The conversion efficiency of the primary sludge to biodiesel under these conditions was 86.4%. Based on the fatty acid methyl ester composition of the obtained biodiesel and measured fuel properties, it was deduced that fuel from primary sludge is more suitable for areas with warmer climates than ones that reach temperatures close to 0 °C. However, the fuel properties of the produced biodiesel were within the limits of accepted international standards. We conclude that production of biodiesel from primary sewage sludge under optimized conditions reduces the impact of the feedstock on the environment, decreases overall costs and produces fuel with acceptable properties.

Original languageEnglish
Pages (from-to)1-9
Number of pages9
JournalBiofuels
DOIs
Publication statusAccepted/In press - Jun 1 2018

    Fingerprint

Keywords

  • Biodiesel
  • in situ transesterification
  • optimization
  • sludge

ASJC Scopus subject areas

  • Renewable Energy, Sustainability and the Environment
  • Waste Management and Disposal

Cite this