Determination of equivalent salt deposit density using wind velocity for a contaminated insulator

Md Abdus Salam, Hemen Goswami, Zia Nadir

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

This paper illustrates a new analytical model for determining equivalent salt deposit density (ESDD) on contaminated insulators using wind velocity. The analytical model is derived using the dimensional analysis technique. The values of ESDD from the analytical model are calculated using different values of wind velocity. These results are compared with the experimental results obtained from sites. The analytical results are also compared with the polynomial model output obtained via least-squares analysis of experimental data. It is found that the results obtained by the analytical model are quite consistent with the experimental results for different range of wind velocity.

Original languageEnglish
Pages (from-to)37-44
Number of pages8
JournalJournal of Electrostatics
Volume63
Issue number1
DOIs
Publication statusPublished - Jan 2005

Fingerprint

Salt deposits
wind velocity
Analytical models
Salts
deposits
insulators
salts
Statistical Models
Least-Squares Analysis
dimensional analysis
polynomials
output

Keywords

  • Dimensional analysis
  • Equivalent salt deposit density (ESDD)
  • Insulator
  • Wind velocity

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Materials Chemistry
  • Materials Science(all)
  • Physics and Astronomy(all)
  • Surfaces and Interfaces

Cite this

Determination of equivalent salt deposit density using wind velocity for a contaminated insulator. / Salam, Md Abdus; Goswami, Hemen; Nadir, Zia.

In: Journal of Electrostatics, Vol. 63, No. 1, 01.2005, p. 37-44.

Research output: Contribution to journalArticle

@article{ce7c3e1e5c8744518a854b0648a9b9cc,
title = "Determination of equivalent salt deposit density using wind velocity for a contaminated insulator",
abstract = "This paper illustrates a new analytical model for determining equivalent salt deposit density (ESDD) on contaminated insulators using wind velocity. The analytical model is derived using the dimensional analysis technique. The values of ESDD from the analytical model are calculated using different values of wind velocity. These results are compared with the experimental results obtained from sites. The analytical results are also compared with the polynomial model output obtained via least-squares analysis of experimental data. It is found that the results obtained by the analytical model are quite consistent with the experimental results for different range of wind velocity.",
keywords = "Dimensional analysis, Equivalent salt deposit density (ESDD), Insulator, Wind velocity",
author = "Salam, {Md Abdus} and Hemen Goswami and Zia Nadir",
year = "2005",
month = "1",
doi = "10.1016/j.elstat.2004.06.004",
language = "English",
volume = "63",
pages = "37--44",
journal = "Journal of Electrostatics",
issn = "0304-3886",
publisher = "Elsevier",
number = "1",

}

TY - JOUR

T1 - Determination of equivalent salt deposit density using wind velocity for a contaminated insulator

AU - Salam, Md Abdus

AU - Goswami, Hemen

AU - Nadir, Zia

PY - 2005/1

Y1 - 2005/1

N2 - This paper illustrates a new analytical model for determining equivalent salt deposit density (ESDD) on contaminated insulators using wind velocity. The analytical model is derived using the dimensional analysis technique. The values of ESDD from the analytical model are calculated using different values of wind velocity. These results are compared with the experimental results obtained from sites. The analytical results are also compared with the polynomial model output obtained via least-squares analysis of experimental data. It is found that the results obtained by the analytical model are quite consistent with the experimental results for different range of wind velocity.

AB - This paper illustrates a new analytical model for determining equivalent salt deposit density (ESDD) on contaminated insulators using wind velocity. The analytical model is derived using the dimensional analysis technique. The values of ESDD from the analytical model are calculated using different values of wind velocity. These results are compared with the experimental results obtained from sites. The analytical results are also compared with the polynomial model output obtained via least-squares analysis of experimental data. It is found that the results obtained by the analytical model are quite consistent with the experimental results for different range of wind velocity.

KW - Dimensional analysis

KW - Equivalent salt deposit density (ESDD)

KW - Insulator

KW - Wind velocity

UR - http://www.scopus.com/inward/record.url?scp=7744243114&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=7744243114&partnerID=8YFLogxK

U2 - 10.1016/j.elstat.2004.06.004

DO - 10.1016/j.elstat.2004.06.004

M3 - Article

VL - 63

SP - 37

EP - 44

JO - Journal of Electrostatics

JF - Journal of Electrostatics

SN - 0304-3886

IS - 1

ER -