Dealing with the challenges of hydraulic fracture initiation in deviated-cased perforated boreholes

S. H. Fallahzadeh, S. R. Shadizadeh, P. Pourafshary

Research output: Chapter in Book/Report/Conference proceedingConference contribution

39 Citations (Scopus)

Abstract

Hydraulic fracturing is an extensively valuable stimulation method in oil and gas wells, which are no more producing efficiently, to improve the recovery of hydrocarbon from the reservoirs. The challenge of fracture initiation pressure and near-wellbore fracture propagation is a complex problem especially in deviated and cased perforated holes. In this paper a computer model is developed for estimating the initiation pressure as well as the orientation geometry of the fracture in the perforations around the borehole. Deviated well drilling techniques are used commonly all over the world to develop the reservoirs which are not well produced by vertical wellbores. Most of such wells are perforated after they have been cased and cemented. The existence of the casing along with the cement properties, considerably influence the stress distribution around the wellbore. In this model analytical equations are applied along with the numerical methods to analyze the stress profile around a cased cemented borehole with arbitrary inclination and azimuth. In addition, new analytical formulas are derived and applied to simulate the stress profile around the perforations, taking account of cement sheath and formation mechanical properties as well as perforation gun orientation. Results of this model are presented using common parameters at different in situ stress regimes, cement and rock properties, and also perforation and well trajectory limits. Wellbore tensile zone, fracture initiation pressure, and investigating the micro-annulus creation are among the main outputs of this modeling. It is concluded that, optimum well inclination and azimuth in conjunction with perforation orientation as well as cement properties can be derived at various stress regimes. As a result lower fracture initiation pressure with better fracture orientation geometry in terms of linking up of small fractures and less fracture tortuosity can be achieved. The significance of this model is its ability in analyzing the stress profile along the perforations tunnel and casing cement sheath, so more realistic fracture initiation pressure and near-wellbore fracture geometry would be anticipated.

Original languageEnglish
Title of host publicationSociety of Petroleum Engineers - Trinidad and Tobago Energy Resources Conference 2010, SPE TT 2010
PublisherSociety of Petroleum Engineers
Pages475-489
Number of pages15
ISBN (Print)9781617388859
DOIs
Publication statusPublished - 2010
Externally publishedYes

Publication series

NameSociety of Petroleum Engineers - Trinidad and Tobago Energy Resources Conference 2010, SPE TT 2010
Volume1

ASJC Scopus subject areas

  • Geochemistry and Petrology
  • Energy Engineering and Power Technology

Fingerprint

Dive into the research topics of 'Dealing with the challenges of hydraulic fracture initiation in deviated-cased perforated boreholes'. Together they form a unique fingerprint.

Cite this