Controlling interactions of colloidal particles and porous media during low salinity water flooding and alkaline flooding by MgO Nanoparticles

Y. Assef, P. Pourafshary, H. Hejazi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Enhanced oil recovery has become a hot topic nowadays. Low-salinity water (LSW) and alkaline flooding are known as two efficient improved oil-recovery techniques to unlock residual oil. An enhanced oil recovery (EOR) project's success will be endangered when the production target is not achieved due to migration of fines, which affects reservoir permeability near the wellbore and leads to declining productivity. In this work, our experimental study aims to use nanoparticles (NPs) for the treatment of colloidal particles migration to improve the performance of the mentioned EOR methods. In LSW and alkaline flooding methods, one critical step is the precise selection of fluids, which increases the effectiveness on these techniques. Therefore, one should choose the optimum salinity rather than the lower one to enhance the efficiency of a typical LSW project and also the optimum pH for the injected slugs rather than the higher one to improve the efficiency of an alkaline flooding project. These limitations make the design of such flooding projects very difficult and challenging. The purpose of this study is to clarify how solution conditions (pH and ionic strength) act upon surface potentials and charge distributions close to solid surfaces. Also the effects of MgO NPs on the point of zero charge (PZC) and critical salt concentration (CSC) are inspected. Zeta potential and turbidity analyses have been utilized as useful tools to examine the effect of NPs on the interactions of colloidal particles with the medium surface. Our results illustrate that the magnitude of the repulsion forces compared to the attraction between fines particles and pore wall surfaces was considerably diminished when the surface of the glass beads was soaked with MgO NPs. The presence of MgO NPs on the bead surface significantly modifies the PZC, increasing it from 3 to around 9, which in turn justifies the retention of particles in a wide range of alkaline conditions. It was found that the MgO NP-Treated medium tends to retain around 97% of the in situ fine particles under very alkaline conditions. A decrease in CSC for all divalent and monovalent salt solutions was also quantitative evidence of a striking improvement effect of these NPs. Therefore, pre-flushing of the medium with a slug of MgO nanofluid prior to alkaline flooding or LSW injection into the reservoir can serve as a promising remedy to counteract the subsequently induced migration of colloidal particles. This technique is of great interest for application in the field, where improved oil recovery is desired; however, fines migration and subsequent formation damage should be avoided. This method minimizes the creation of damage, prevents severe plugging in the near-wellbore area, and improves communication between the wellbore and the virgin formation.

Original languageEnglish
Title of host publicationSociety of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016
PublisherSociety of Petroleum Engineers
ISBN (Print)9781613994450
Publication statusPublished - 2016
EventSPE EOR Conference at Oil and Gas West Asia, OGWA 2016 - Muscat, Oman
Duration: Mar 21 2016Mar 23 2016

Other

OtherSPE EOR Conference at Oil and Gas West Asia, OGWA 2016
CountryOman
CityMuscat
Period3/21/163/23/16

Fingerprint

Porous materials
porous medium
flooding
Oils
Nanoparticles
Water
enhanced oil recovery
Recovery
Salts
slug
salt
oil
recovery method
damage
Water injection
Charge distribution
Surface potential
Turbidity
Zeta potential
Surface charge

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Fuel Technology
  • Geochemistry and Petrology

Cite this

Assef, Y., Pourafshary, P., & Hejazi, H. (2016). Controlling interactions of colloidal particles and porous media during low salinity water flooding and alkaline flooding by MgO Nanoparticles. In Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016 Society of Petroleum Engineers.

Controlling interactions of colloidal particles and porous media during low salinity water flooding and alkaline flooding by MgO Nanoparticles. / Assef, Y.; Pourafshary, P.; Hejazi, H.

Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016. Society of Petroleum Engineers, 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Assef, Y, Pourafshary, P & Hejazi, H 2016, Controlling interactions of colloidal particles and porous media during low salinity water flooding and alkaline flooding by MgO Nanoparticles. in Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016. Society of Petroleum Engineers, SPE EOR Conference at Oil and Gas West Asia, OGWA 2016, Muscat, Oman, 3/21/16.
Assef Y, Pourafshary P, Hejazi H. Controlling interactions of colloidal particles and porous media during low salinity water flooding and alkaline flooding by MgO Nanoparticles. In Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016. Society of Petroleum Engineers. 2016
Assef, Y. ; Pourafshary, P. ; Hejazi, H. / Controlling interactions of colloidal particles and porous media during low salinity water flooding and alkaline flooding by MgO Nanoparticles. Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016. Society of Petroleum Engineers, 2016.
@inproceedings{dc9776b6e1504773966b94c5b8e47837,
title = "Controlling interactions of colloidal particles and porous media during low salinity water flooding and alkaline flooding by MgO Nanoparticles",
abstract = "Enhanced oil recovery has become a hot topic nowadays. Low-salinity water (LSW) and alkaline flooding are known as two efficient improved oil-recovery techniques to unlock residual oil. An enhanced oil recovery (EOR) project's success will be endangered when the production target is not achieved due to migration of fines, which affects reservoir permeability near the wellbore and leads to declining productivity. In this work, our experimental study aims to use nanoparticles (NPs) for the treatment of colloidal particles migration to improve the performance of the mentioned EOR methods. In LSW and alkaline flooding methods, one critical step is the precise selection of fluids, which increases the effectiveness on these techniques. Therefore, one should choose the optimum salinity rather than the lower one to enhance the efficiency of a typical LSW project and also the optimum pH for the injected slugs rather than the higher one to improve the efficiency of an alkaline flooding project. These limitations make the design of such flooding projects very difficult and challenging. The purpose of this study is to clarify how solution conditions (pH and ionic strength) act upon surface potentials and charge distributions close to solid surfaces. Also the effects of MgO NPs on the point of zero charge (PZC) and critical salt concentration (CSC) are inspected. Zeta potential and turbidity analyses have been utilized as useful tools to examine the effect of NPs on the interactions of colloidal particles with the medium surface. Our results illustrate that the magnitude of the repulsion forces compared to the attraction between fines particles and pore wall surfaces was considerably diminished when the surface of the glass beads was soaked with MgO NPs. The presence of MgO NPs on the bead surface significantly modifies the PZC, increasing it from 3 to around 9, which in turn justifies the retention of particles in a wide range of alkaline conditions. It was found that the MgO NP-Treated medium tends to retain around 97{\%} of the in situ fine particles under very alkaline conditions. A decrease in CSC for all divalent and monovalent salt solutions was also quantitative evidence of a striking improvement effect of these NPs. Therefore, pre-flushing of the medium with a slug of MgO nanofluid prior to alkaline flooding or LSW injection into the reservoir can serve as a promising remedy to counteract the subsequently induced migration of colloidal particles. This technique is of great interest for application in the field, where improved oil recovery is desired; however, fines migration and subsequent formation damage should be avoided. This method minimizes the creation of damage, prevents severe plugging in the near-wellbore area, and improves communication between the wellbore and the virgin formation.",
author = "Y. Assef and P. Pourafshary and H. Hejazi",
year = "2016",
language = "English",
isbn = "9781613994450",
booktitle = "Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016",
publisher = "Society of Petroleum Engineers",

}

TY - GEN

T1 - Controlling interactions of colloidal particles and porous media during low salinity water flooding and alkaline flooding by MgO Nanoparticles

AU - Assef, Y.

AU - Pourafshary, P.

AU - Hejazi, H.

PY - 2016

Y1 - 2016

N2 - Enhanced oil recovery has become a hot topic nowadays. Low-salinity water (LSW) and alkaline flooding are known as two efficient improved oil-recovery techniques to unlock residual oil. An enhanced oil recovery (EOR) project's success will be endangered when the production target is not achieved due to migration of fines, which affects reservoir permeability near the wellbore and leads to declining productivity. In this work, our experimental study aims to use nanoparticles (NPs) for the treatment of colloidal particles migration to improve the performance of the mentioned EOR methods. In LSW and alkaline flooding methods, one critical step is the precise selection of fluids, which increases the effectiveness on these techniques. Therefore, one should choose the optimum salinity rather than the lower one to enhance the efficiency of a typical LSW project and also the optimum pH for the injected slugs rather than the higher one to improve the efficiency of an alkaline flooding project. These limitations make the design of such flooding projects very difficult and challenging. The purpose of this study is to clarify how solution conditions (pH and ionic strength) act upon surface potentials and charge distributions close to solid surfaces. Also the effects of MgO NPs on the point of zero charge (PZC) and critical salt concentration (CSC) are inspected. Zeta potential and turbidity analyses have been utilized as useful tools to examine the effect of NPs on the interactions of colloidal particles with the medium surface. Our results illustrate that the magnitude of the repulsion forces compared to the attraction between fines particles and pore wall surfaces was considerably diminished when the surface of the glass beads was soaked with MgO NPs. The presence of MgO NPs on the bead surface significantly modifies the PZC, increasing it from 3 to around 9, which in turn justifies the retention of particles in a wide range of alkaline conditions. It was found that the MgO NP-Treated medium tends to retain around 97% of the in situ fine particles under very alkaline conditions. A decrease in CSC for all divalent and monovalent salt solutions was also quantitative evidence of a striking improvement effect of these NPs. Therefore, pre-flushing of the medium with a slug of MgO nanofluid prior to alkaline flooding or LSW injection into the reservoir can serve as a promising remedy to counteract the subsequently induced migration of colloidal particles. This technique is of great interest for application in the field, where improved oil recovery is desired; however, fines migration and subsequent formation damage should be avoided. This method minimizes the creation of damage, prevents severe plugging in the near-wellbore area, and improves communication between the wellbore and the virgin formation.

AB - Enhanced oil recovery has become a hot topic nowadays. Low-salinity water (LSW) and alkaline flooding are known as two efficient improved oil-recovery techniques to unlock residual oil. An enhanced oil recovery (EOR) project's success will be endangered when the production target is not achieved due to migration of fines, which affects reservoir permeability near the wellbore and leads to declining productivity. In this work, our experimental study aims to use nanoparticles (NPs) for the treatment of colloidal particles migration to improve the performance of the mentioned EOR methods. In LSW and alkaline flooding methods, one critical step is the precise selection of fluids, which increases the effectiveness on these techniques. Therefore, one should choose the optimum salinity rather than the lower one to enhance the efficiency of a typical LSW project and also the optimum pH for the injected slugs rather than the higher one to improve the efficiency of an alkaline flooding project. These limitations make the design of such flooding projects very difficult and challenging. The purpose of this study is to clarify how solution conditions (pH and ionic strength) act upon surface potentials and charge distributions close to solid surfaces. Also the effects of MgO NPs on the point of zero charge (PZC) and critical salt concentration (CSC) are inspected. Zeta potential and turbidity analyses have been utilized as useful tools to examine the effect of NPs on the interactions of colloidal particles with the medium surface. Our results illustrate that the magnitude of the repulsion forces compared to the attraction between fines particles and pore wall surfaces was considerably diminished when the surface of the glass beads was soaked with MgO NPs. The presence of MgO NPs on the bead surface significantly modifies the PZC, increasing it from 3 to around 9, which in turn justifies the retention of particles in a wide range of alkaline conditions. It was found that the MgO NP-Treated medium tends to retain around 97% of the in situ fine particles under very alkaline conditions. A decrease in CSC for all divalent and monovalent salt solutions was also quantitative evidence of a striking improvement effect of these NPs. Therefore, pre-flushing of the medium with a slug of MgO nanofluid prior to alkaline flooding or LSW injection into the reservoir can serve as a promising remedy to counteract the subsequently induced migration of colloidal particles. This technique is of great interest for application in the field, where improved oil recovery is desired; however, fines migration and subsequent formation damage should be avoided. This method minimizes the creation of damage, prevents severe plugging in the near-wellbore area, and improves communication between the wellbore and the virgin formation.

UR - http://www.scopus.com/inward/record.url?scp=84969256727&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84969256727&partnerID=8YFLogxK

M3 - Conference contribution

SN - 9781613994450

BT - Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia, OGWA 2016

PB - Society of Petroleum Engineers

ER -