Computational Analysis of Liquid Jet Impingement Microchannel Cooling

M. Zunaid, Haeng Muk Cho, Afzal Husain, Anant Jindal, Rohit Kumar, Bhupendra Singh Chauhan

Research output: Contribution to journalConference article

1 Citation (Scopus)

Abstract

This study evaluated a micro-jet impingement heat sink for the cooling of electronic field at micro level devices. In the present study, a three-dimensional fluid flow and heat transfer analysis was carried out numerically for different fluids and various heat sink materials. Six different materials as copper, aluminum, steel, silicon, titanium and nickel were analyzed to be used as substrate of the micro-channel heat sink. Water, DIUF water (De-Ionized Ultra-Filtered), Performance fluid-5052, and HF-7100 were used as working fluids. For the micro channel heat sink investigated and obtained that the temperature distribution along the flow direction in the solid and fluid regions have linear behavior. Heat transfer coefficient and temperature distribution was obtained for various cases and the results have been interpreted. It was observed that copper based material has the highest value of heat transfer coefficient as compared to remaining five materials analyzed. Copper and working fluid DIUF water together have the highest heat transfer coefficient.

Original languageEnglish
Pages (from-to)27877-27883
Number of pages7
JournalMaterials Today: Proceedings
Volume5
Issue number14
DOIs
Publication statusPublished - Jan 1 2018
Event2018 International Conference on Composite Materials: Manufacturing, Experimental Techniques, Modeling and Simulation, ICCMMEMS 2018 - Delhi, India
Duration: Mar 1 2018Mar 3 2018

Fingerprint

Microchannels
Heat sinks
Cooling
Fluids
Heat transfer coefficients
Liquids
Copper
Water
Temperature distribution
Silicon steel
Titanium
Nickel
Aluminum
Flow of fluids
Heat transfer
Substrates

Keywords

  • CFD
  • cooling
  • heat transfer
  • impingement
  • microchannel

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

Computational Analysis of Liquid Jet Impingement Microchannel Cooling. / Zunaid, M.; Cho, Haeng Muk; Husain, Afzal; Jindal, Anant; Kumar, Rohit; Chauhan, Bhupendra Singh.

In: Materials Today: Proceedings, Vol. 5, No. 14, 01.01.2018, p. 27877-27883.

Research output: Contribution to journalConference article

Zunaid, M. ; Cho, Haeng Muk ; Husain, Afzal ; Jindal, Anant ; Kumar, Rohit ; Chauhan, Bhupendra Singh. / Computational Analysis of Liquid Jet Impingement Microchannel Cooling. In: Materials Today: Proceedings. 2018 ; Vol. 5, No. 14. pp. 27877-27883.
@article{20fe01885125406e8e548881e64dcace,
title = "Computational Analysis of Liquid Jet Impingement Microchannel Cooling",
abstract = "This study evaluated a micro-jet impingement heat sink for the cooling of electronic field at micro level devices. In the present study, a three-dimensional fluid flow and heat transfer analysis was carried out numerically for different fluids and various heat sink materials. Six different materials as copper, aluminum, steel, silicon, titanium and nickel were analyzed to be used as substrate of the micro-channel heat sink. Water, DIUF water (De-Ionized Ultra-Filtered), Performance fluid-5052, and HF-7100 were used as working fluids. For the micro channel heat sink investigated and obtained that the temperature distribution along the flow direction in the solid and fluid regions have linear behavior. Heat transfer coefficient and temperature distribution was obtained for various cases and the results have been interpreted. It was observed that copper based material has the highest value of heat transfer coefficient as compared to remaining five materials analyzed. Copper and working fluid DIUF water together have the highest heat transfer coefficient.",
keywords = "CFD, cooling, heat transfer, impingement, microchannel",
author = "M. Zunaid and Cho, {Haeng Muk} and Afzal Husain and Anant Jindal and Rohit Kumar and Chauhan, {Bhupendra Singh}",
year = "2018",
month = "1",
day = "1",
doi = "10.1016/j.matpr.2018.10.026",
language = "English",
volume = "5",
pages = "27877--27883",
journal = "Materials Today: Proceedings",
issn = "2214-7853",
publisher = "Elsevier Limited",
number = "14",

}

TY - JOUR

T1 - Computational Analysis of Liquid Jet Impingement Microchannel Cooling

AU - Zunaid, M.

AU - Cho, Haeng Muk

AU - Husain, Afzal

AU - Jindal, Anant

AU - Kumar, Rohit

AU - Chauhan, Bhupendra Singh

PY - 2018/1/1

Y1 - 2018/1/1

N2 - This study evaluated a micro-jet impingement heat sink for the cooling of electronic field at micro level devices. In the present study, a three-dimensional fluid flow and heat transfer analysis was carried out numerically for different fluids and various heat sink materials. Six different materials as copper, aluminum, steel, silicon, titanium and nickel were analyzed to be used as substrate of the micro-channel heat sink. Water, DIUF water (De-Ionized Ultra-Filtered), Performance fluid-5052, and HF-7100 were used as working fluids. For the micro channel heat sink investigated and obtained that the temperature distribution along the flow direction in the solid and fluid regions have linear behavior. Heat transfer coefficient and temperature distribution was obtained for various cases and the results have been interpreted. It was observed that copper based material has the highest value of heat transfer coefficient as compared to remaining five materials analyzed. Copper and working fluid DIUF water together have the highest heat transfer coefficient.

AB - This study evaluated a micro-jet impingement heat sink for the cooling of electronic field at micro level devices. In the present study, a three-dimensional fluid flow and heat transfer analysis was carried out numerically for different fluids and various heat sink materials. Six different materials as copper, aluminum, steel, silicon, titanium and nickel were analyzed to be used as substrate of the micro-channel heat sink. Water, DIUF water (De-Ionized Ultra-Filtered), Performance fluid-5052, and HF-7100 were used as working fluids. For the micro channel heat sink investigated and obtained that the temperature distribution along the flow direction in the solid and fluid regions have linear behavior. Heat transfer coefficient and temperature distribution was obtained for various cases and the results have been interpreted. It was observed that copper based material has the highest value of heat transfer coefficient as compared to remaining five materials analyzed. Copper and working fluid DIUF water together have the highest heat transfer coefficient.

KW - CFD

KW - cooling

KW - heat transfer

KW - impingement

KW - microchannel

UR - http://www.scopus.com/inward/record.url?scp=85061203559&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85061203559&partnerID=8YFLogxK

U2 - 10.1016/j.matpr.2018.10.026

DO - 10.1016/j.matpr.2018.10.026

M3 - Conference article

VL - 5

SP - 27877

EP - 27883

JO - Materials Today: Proceedings

JF - Materials Today: Proceedings

SN - 2214-7853

IS - 14

ER -