An innovative ECL sensor based on AuNPs linker for Ru(bpy)3 2+ molecules doped onto an alkaline pretreated poly(4-aminodiphenylamine) film

Mohammed M. Al-Hinaai, Htet H. Kyaw, Salim H. Al-Harthi, Emad A. Khudaish

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

An innovative construction approach relies on incorporation of gold nanoparticles (AuNPs) as a sandwich linking species between two assembled layers composed of tris(2,2′-bipyridyl)ruthenium(II), Ru(bpy)3 2+. The entire luminescent system is doped at an alkaline treated polymeric film made of poly(4-aminodiphenylamine), t-Padpa, originally deposited at the glassy carbon electrode by repetitive electrochemical scanning. The surface morphology and the composition of the proposed (Ru.AuNPs.Ru.t-Padpa) sensor along with its electrochemical properties were studied using Atomic Force Microscopy (AFM), X-Ray Photoelectron Spectroscopy (XPS) and Electrochemical Impedance Spectroscopy (EIS) methods The analytical performance of the developed sensor and its stability were tested using tripropyl amine (TPA) as a typical co-reactant in the development of ECL sensors. The ECL system shows a remarkable sensitivity towards TPA quantification with a detection limit (3σ) of 10 nM (1.4 ppb). The proposed sensor exhibited a greater efficiency and higher stability over the native ruthenium doped polymer (Ru.t-Padpa) evaluated by its performance for a certain shelf life-time. The present approach confirms the fabrication of a robust and efficient sensor characterized by the parallel operative effects of both AuNPs and the available concentrated surface luminescent molecules.

Original languageEnglish
Pages (from-to)460-468
Number of pages9
JournalSensors and Actuators, B: Chemical
Volume257
DOIs
Publication statusPublished - Mar 1 2018

Fingerprint

4-aminodiphenylamine
Emitter coupled logic circuits
Molecules
sensors
Sensors
Ruthenium
molecules
ruthenium
Amines
amines
life (durability)
2,2'-Dipyridyl
polymeric films
glassy carbon
Glassy carbon
Electrochemical impedance spectroscopy
Electrochemical properties
Polymer films
Gold
Surface morphology

Keywords

  • Electrochemiluninescence sensors
  • Gold nanoparticles
  • Poly(4-aminodiphenyl-amine)
  • Tris(bipyridyl) ruthenium(II)

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Instrumentation
  • Condensed Matter Physics
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Electrical and Electronic Engineering
  • Materials Chemistry

Cite this

@article{9d90e7482cb540c19bd79bc33a3e30a4,
title = "An innovative ECL sensor based on AuNPs linker for Ru(bpy)3 2+ molecules doped onto an alkaline pretreated poly(4-aminodiphenylamine) film",
abstract = "An innovative construction approach relies on incorporation of gold nanoparticles (AuNPs) as a sandwich linking species between two assembled layers composed of tris(2,2′-bipyridyl)ruthenium(II), Ru(bpy)3 2+. The entire luminescent system is doped at an alkaline treated polymeric film made of poly(4-aminodiphenylamine), t-Padpa, originally deposited at the glassy carbon electrode by repetitive electrochemical scanning. The surface morphology and the composition of the proposed (Ru.AuNPs.Ru.t-Padpa) sensor along with its electrochemical properties were studied using Atomic Force Microscopy (AFM), X-Ray Photoelectron Spectroscopy (XPS) and Electrochemical Impedance Spectroscopy (EIS) methods The analytical performance of the developed sensor and its stability were tested using tripropyl amine (TPA) as a typical co-reactant in the development of ECL sensors. The ECL system shows a remarkable sensitivity towards TPA quantification with a detection limit (3σ) of 10 nM (1.4 ppb). The proposed sensor exhibited a greater efficiency and higher stability over the native ruthenium doped polymer (Ru.t-Padpa) evaluated by its performance for a certain shelf life-time. The present approach confirms the fabrication of a robust and efficient sensor characterized by the parallel operative effects of both AuNPs and the available concentrated surface luminescent molecules.",
keywords = "Electrochemiluninescence sensors, Gold nanoparticles, Poly(4-aminodiphenyl-amine), Tris(bipyridyl) ruthenium(II)",
author = "Al-Hinaai, {Mohammed M.} and Kyaw, {Htet H.} and Al-Harthi, {Salim H.} and Khudaish, {Emad A.}",
year = "2018",
month = "3",
day = "1",
doi = "10.1016/j.snb.2017.11.001",
language = "English",
volume = "257",
pages = "460--468",
journal = "Sensors and Actuators, B: Chemical",
issn = "0925-4005",
publisher = "Elsevier",

}

TY - JOUR

T1 - An innovative ECL sensor based on AuNPs linker for Ru(bpy)3 2+ molecules doped onto an alkaline pretreated poly(4-aminodiphenylamine) film

AU - Al-Hinaai, Mohammed M.

AU - Kyaw, Htet H.

AU - Al-Harthi, Salim H.

AU - Khudaish, Emad A.

PY - 2018/3/1

Y1 - 2018/3/1

N2 - An innovative construction approach relies on incorporation of gold nanoparticles (AuNPs) as a sandwich linking species between two assembled layers composed of tris(2,2′-bipyridyl)ruthenium(II), Ru(bpy)3 2+. The entire luminescent system is doped at an alkaline treated polymeric film made of poly(4-aminodiphenylamine), t-Padpa, originally deposited at the glassy carbon electrode by repetitive electrochemical scanning. The surface morphology and the composition of the proposed (Ru.AuNPs.Ru.t-Padpa) sensor along with its electrochemical properties were studied using Atomic Force Microscopy (AFM), X-Ray Photoelectron Spectroscopy (XPS) and Electrochemical Impedance Spectroscopy (EIS) methods The analytical performance of the developed sensor and its stability were tested using tripropyl amine (TPA) as a typical co-reactant in the development of ECL sensors. The ECL system shows a remarkable sensitivity towards TPA quantification with a detection limit (3σ) of 10 nM (1.4 ppb). The proposed sensor exhibited a greater efficiency and higher stability over the native ruthenium doped polymer (Ru.t-Padpa) evaluated by its performance for a certain shelf life-time. The present approach confirms the fabrication of a robust and efficient sensor characterized by the parallel operative effects of both AuNPs and the available concentrated surface luminescent molecules.

AB - An innovative construction approach relies on incorporation of gold nanoparticles (AuNPs) as a sandwich linking species between two assembled layers composed of tris(2,2′-bipyridyl)ruthenium(II), Ru(bpy)3 2+. The entire luminescent system is doped at an alkaline treated polymeric film made of poly(4-aminodiphenylamine), t-Padpa, originally deposited at the glassy carbon electrode by repetitive electrochemical scanning. The surface morphology and the composition of the proposed (Ru.AuNPs.Ru.t-Padpa) sensor along with its electrochemical properties were studied using Atomic Force Microscopy (AFM), X-Ray Photoelectron Spectroscopy (XPS) and Electrochemical Impedance Spectroscopy (EIS) methods The analytical performance of the developed sensor and its stability were tested using tripropyl amine (TPA) as a typical co-reactant in the development of ECL sensors. The ECL system shows a remarkable sensitivity towards TPA quantification with a detection limit (3σ) of 10 nM (1.4 ppb). The proposed sensor exhibited a greater efficiency and higher stability over the native ruthenium doped polymer (Ru.t-Padpa) evaluated by its performance for a certain shelf life-time. The present approach confirms the fabrication of a robust and efficient sensor characterized by the parallel operative effects of both AuNPs and the available concentrated surface luminescent molecules.

KW - Electrochemiluninescence sensors

KW - Gold nanoparticles

KW - Poly(4-aminodiphenyl-amine)

KW - Tris(bipyridyl) ruthenium(II)

UR - http://www.scopus.com/inward/record.url?scp=85032722079&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85032722079&partnerID=8YFLogxK

U2 - 10.1016/j.snb.2017.11.001

DO - 10.1016/j.snb.2017.11.001

M3 - Article

AN - SCOPUS:85032722079

VL - 257

SP - 460

EP - 468

JO - Sensors and Actuators, B: Chemical

JF - Sensors and Actuators, B: Chemical

SN - 0925-4005

ER -