Find Research outputs

Search results

• Conference contribution

  MFRM to adjust for Rater Severity/Leniency

  Bahrouni, F., 2011, Paper presented at the 11th Annual ELT Conference, SQU. April 20, 2011.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Microbial enhanced oil recovery at high salinities using biosurfactant at lower concentrations

  Souayeh, M., Al-Wahaibi, Y., Al-Bahry, S., Elshafie, A., Al-Bemani, A., Joshi, S., Al-Hashmi, A. & Al-Mandhari, M., 2014, Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia 2014: Driving Integrated and Innovative EOR. Society of Petroleum Engineers, p. 207-213 7 p. (Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia 2014: Driving Integrated and Innovative EOR).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Micro-Grid Educational Laboratory Modernization using IEDs

  Elhaffar, A., Tarhuni, N. & Al-Hinai, A., 2022, Proceedings of the 2022 IEEE Global Engineering Education Conference, EDUCON 2022. Jemni, M., Kallel, I. & Akkari, A. (eds.). IEEE Computer Society, p. 1443-1447 5 p. (IEEE Global Engineering Education Conference, EDUCON; vol. 2022-March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Micro-grid system based on renewable power generation units

  Ahshan, R., Iqbal, M. T., Mann, G. K. I. & Quaicoe, J. E., 2010, 2010 23rd Canadian Conference on Electrical and Computer Engineering, CCECE 2010. 5575112. (Canadian Conference on Electrical and Computer Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  16 Citations (Scopus)

• Micromechanical model for 3D generally orthotropic grid-reinforced composites

  Hassan, E. M., Kalamkarov, A. L. & Georgiades, A. V., 2009, ICCM International Conferences on Composite Materials.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Micromechanical modeling of two-dimensional periodic cellular materials

  Alzebdeh, K., Al-Shabibi, A. & Pervez, T., 2013, Mechanics of Solids, Structures and Fluids. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Microstructure-property relationship for impact energy absorption of functionally graded porous structures of acrylonitrile butadiene styrene (ABS)

  Jahwari, F. A., Huang, Y. & Naguib, H. E., 2016, ANTEC 2016 - Proceedings of the Annual Technical Conference and Exhibition of the Society of Plastics Engineers. Society of Plastics Engineers, p. 1842-1846 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Microturbines load following controller design in deregulated power distribution systems

  Al-Hinai, A. & Feliachi, A., 2008, IEEE Power and Energy Society 2008 General Meeting: Conversion and Delivery of Electrical Energy in the 21st Century, PES. 4596632. (IEEE Power and Energy Society 2008 General Meeting: Conversion and Delivery of Electrical Energy in the 21st Century, PES).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Migrating social business process to SOA

  Al-Thuhli, A., Al-Badawi, M., Baghdadi, Y. & Al-Hamdani, A., Dec 11 2015, 17th International Conference on Information Integration and Web-Based Applications and Services, iiWAS 2015 - Proceedings. Association for Computing Machinery, Inc, 89

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Minimizing the environmental impact of the envisaged expansion in power generation in main interconnected system of Oman

  Malik, A. S., 2008, 2008 IEEE International Systems Conference Proceedings, SysCon 2008. p. 411-414 4 p. 4519042. (2008 IEEE International Systems Conference Proceedings, SysCon 2008).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Minimizing the Makespan in flowshops with flexible operations

  Demirtas, H. H. & Gultekin, H., 2012, Proceedings - INCOM'12, 14th IFAC Symposium on Information Control Problems in Manufacturing. PART 1 ed. IFAC Secretariat, p. 1366-1370 5 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 14, no. PART 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Minimum classification error using time-frequency analysis

  Breakenridge, C. & Mesbah, M., 2003, Proceedings of the 3rd IEEE International Symposium on Signal Processing and Information Technology, ISSPIT 2003. Institute of Electrical and Electronics Engineers Inc., p. 717-720 4 p. 1341221. (Proceedings of the 3rd IEEE International Symposium on Signal Processing and Information Technology, ISSPIT 2003).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Miscibility effects on performance of cyclic CO ₂ injection in hysteretic tight oil reservoirs

  Assef, Y., Pereira Almao, P. & Pourafshary, P., 2019, Society of Petroleum Engineers - Abu Dhabi International Petroleum Exhibition and Conference 2018, ADIPEC 2018. Society of Petroleum Engineers, (Society of Petroleum Engineers - Abu Dhabi International Petroleum Exhibition and Conference 2018, ADIPEC 2018).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Miscible Carbon Dioxide flood imaging - Analysis of 4D seismic wavelet transform spectral composites

  Raef, A. E., Watney, L. W. & Byrnes, A. P., 2009, 15th European Symposium on Improved Oil Recovery 2009. p. 295-304 10 p. (15th European Symposium on Improved Oil Recovery 2009).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Mitigate friction of coiled tubing by optimization and axial vibrations to facilitate extended reach drilling operations

  Haneef, M. D. & Abdo, J., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. p. 207-213 7 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 12).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• Mitigating the environmental impact of power generation by direct load control in industrial sector of Oman

  Malik, A., Izhar, T. & Mata'ni, F. A., 2008, 2nd International Conference on Electrical Engineering, ICEE. 4553928. (2nd International Conference on Electrical Engineering, ICEE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Mitigating the impact of Distributed Generator on medium Distribution Network by adaptive protection scheme

  El Naily, N., Saad, S. M., Elhaffar, A., Hussein, T. & Mohamed, F. A., May 10 2017, 2017 8th International Renewable Energy Congress, IREC 2017. Institute of Electrical and Electronics Engineers Inc., 7925989

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Mitigation of electromagnetic field leakage from apertures and enclosures using electromagnetic bandgap (EBG) structures

  Bait-Suwailam, M. M. & Ramahi, O. M., 2011, EMC 2011 - Proceedings: 2011 IEEE International Symposium on Electromagnetic Compatibility. p. 39-44 6 p. 6038281. (IEEE International Symposium on Electromagnetic Compatibility).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Mitigation of fine particles migration in deep bed filters treated by a nanofluid slug: An experimental study

  Arab, D., Pourafshary, P. & Ayatollahi, S., 2014, Ultrafine Grained and Nano-Structured Materials IV. p. 841-845 5 p. (Advanced Materials Research; vol. 829).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  10 Citations (Scopus)

• Mixed convection opposing flow in porous annulus

  Salman Ahmed, J. N., Kamangar, S., Al-Rashed, A. A. A. A., Khan, T. M. Y. & Khaleed, H. M. T., Jun 8 2016, International Conference of Numerical Analysis and Applied Mathematics 2015, ICNAAM 2015. American Institute of Physics Inc., Vol. 1738. 480139

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Mobile assisted language learning: Potential and limitations of using ‘WhatsApp’ messenger to enhance students' writing skills

  Gasmi, A., 2014, INTED International Conference, Spain.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Mobile cloud computing: Advantage, disadvantage and open challenge

  Alzahrani, A., Alalwan, N. & Sarrab, M., 2014, Proceedings of the 7th Euro American Conference on Telematics and Information Systems, EATIS 2014. Association for Computing Machinery, 2590670. (ACM International Conference Proceeding Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  20 Citations (Scopus)

• Mobile-phone users' attitudes towards' mobile commerce & services in the Gulf cooperation council countries: Case study

  Manochehri, N. N. & Alhinai, Y. S., 2008, 5th International Conference Service Systems and Service Management - Exploring Service Dynamics with Science and Innovative Technology, ICSSSM'08. 4598475. (5th International Conference Service Systems and Service Management - Exploring Service Dynamics with Science and Innovative Technology, ICSSSM'08).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• Mobile phone users attitude towards Mobile Commerce (m-commerce) and Mobile Services in Oman

  Manochehri, N. N. & Alhinai, Y., 2006, 2006 Second IEEE and IFIP International Conference in Central Asia on Internet, ICI 2006. IEEE Computer Society, 4055209. (2006 Second IEEE and IFIP International Conference in Central Asia on Internet, ICI 2006).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Mobility determinations of molecular ions for hypersonics

  Leone, S. R., Husband, J. & Bierbaum, V. M., 2003, 41st Aerospace Sciences Meeting and Exhibit. (41st Aerospace Sciences Meeting and Exhibit).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modal interaction in a levitation force mems based resonator

  Zamanzadeh, M., Meijer, H. G. E., Jafarsadeghi-Pournaki, I. & Ouakad, H. M., 2021, Dynamics, Vibration, and Control. American Society of Mechanical Engineers (ASME), v07bt07a064. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7B-2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Model-based investigation on MIMO channel capacity in main street of urban microcells

  Abouda, A. A., Tarhuni, N. G. & El-Sallabi, H. M., 2005, 2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest. p. 313-316 4 p. 1551803. (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest); vol. 2 A).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Model identification of terfenol-d magnetostrictive actuator for precise positioning control

  Saleem, A., Ghodsi, M., Mesbah, M. & Ozer, A., 2016, Active and Passive Smart Structures and Integrated Systems 2016. SPIE, Vol. 9799. 97992J

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Modeling and analysis of soft contact in robotic grasping using bond graph methods

  Khurshid, A., Ghafoor, A. & Malik, M. A., 2011, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 189-193. p. 1786-1792 7 p. (Advanced Materials Research; vol. 189-193).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Modeling and control of two manipulators handling a flexible beam

  Al-Yahmadi, A. S. & Hsia, T. C., 2005, Proceedings - Wec 05: Fourth World Enformatika Conference. Ardil, C. (ed.). p. 147-150 4 p. (Proceedings - Wec 05: Fourth World Enformatika Conference; vol. 6).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Modeling and experimental investigations of drill pipe failure

  Abdo, J., Hassan, E. M., Boulbrachene, K. & Kwak, J., 2017, Systems, Design, and Complexity. American Society of Mechanical Engineers (ASME), Vol. 11.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modeling and predicting point-to-point communication delay of circuit switching in the mesh-connected networks

  Safaei, F., Khonsari, A., Fathy, M. & Ould-Khaoua, M., 2008, Distributed Computing and Networking - 9th International Conference, ICDCN 2008, Proceedings. Springer Verlag, p. 496-502 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4904 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modeling and simulation for car battery manufacturing for cost effectiveness

  Khadem, M. & Ali, A., 2008, Proceedings of the 11th IASTED International Conference on Intelligent Systems and Control, ISC 2008. p. 50-54 5 p. (Proceedings of the IASTED International Conference on Intelligent Systems and Control).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Modeling and simulations of collapse instabilities of microbeams due to capillary forces

  Ouakad, H. M. & Younis, M. I., Sep 21 2009, 2008 Proceedings of ASME International Mechanical Engineering Congress and Exposition, IMECE 2008. PART A ed. p. 187-195 9 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 13, no. PART A).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• Modeling and simulations of transformation and twinning induced plasticity in advanced high strength austenitic steels

  Khan, R., Pervez, T. & Al-Abri, O. S., 2015, Mechanics of Solids, Structures and Fluids. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9-2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modeling biomechanical legs with toe-joint using simscape

  Eldirdiry, O. & Zaier, R., Apr 2 2018, 11th International Symposium on Mechatronics and its Applications, ISMA 2018. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-January. p. 1-7 7 p. 8330129

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  13 Citations (Scopus)

• Modeling differentiated services-based QoS in wormhole-routed NoCs

  Moadeli, M., Vanderbauwhede, W., Shahrabi, A. & Ould-Khaoua, M., 2008, Proceedings - 22nd International Conference on Advanced Information Networking and Applications, AINA 2008. p. 942-949 8 p. 4482807. (Proceedings - International Conference on Advanced Information Networking and Applications, AINA).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Modeling mobile learning system using ANFIS

  Al-Hmouz, A., Shen, J., Yan, J. & Al-Hmouz, R., 2011, Proceedings of the 2011 11th IEEE International Conference on Advanced Learning Technologies, ICALT 2011. p. 378-380 3 p. 5992351. (Proceedings of the 2011 11th IEEE International Conference on Advanced Learning Technologies, ICALT 2011).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• Modeling of BLDC motor with ideal back-EMF for automotive applications

  Tashakori, A., Ektesabi, M. & Hosseinzadeh, N., 2011, Proceedings of the World Congress on Engineering 2011, WCE 2011. p. 1504-1508 5 p. (Proceedings of the World Congress on Engineering 2011, WCE 2011; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  39 Citations (Scopus)

• Modeling of CO, NO_x and CO₂ due to vehicle emissions from sultan Qaboos university in Oman

  Abdul-Wahab, S. A. & Fadlallah, S. O., 2015, Hydraulic Engineering III - Proceedings of the 3rd Technical Conference on Hydraulic Engineering, CHE 2014. Xie, L. (ed.). CRC Press/Balkema, p. 159-164 6 p. (Hydraulic Engineering III - Proceedings of the 3rd Technical Conference on Hydraulic Engineering, CHE 2014).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modeling of contact area, contact force, and contact stiffness of mechanical systems with friction

  Abdo, J. & Shamseldin, E., 2005, Proceedings of the ASME Tribology Division 2005. 16 ed. p. 295-302 8 p. (American Society of Mechanical Engineers, Tribology Division, TRIB; no. 16).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Modeling of Eco-house hybrid energy system

  Al-Badi, A. H., Yousef, H., Al-Ghailani, M., Al Jafari, H. & Al Maskari, A., 2012, Proceedings of the IASTED International Conference on Engineering and Applied Science, EAS 2012. p. 291-296 6 p. (Proceedings of the IASTED International Conference on Engineering and Applied Science, EAS 2012).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modeling of normal and tangential contact stiffness of rough surfaces

  Abdo, J., 2005, Proceedings of the Fifth IASTED International Conference on Modelling, Simulation, and Optimization. p. 91-96 6 p. (Proceedings of the IASTED International Conference on Modelling, Simulation, and Optimization; vol. 2005).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modeling supply chain network for a poultry industry in Oman: A case study

  Al-Harrasi, A., Al-Ajmi, M., Al-Shidhani, M., Ambu-Saidi, M., Khadem, M., Shamsuzzoha, A. & Piya, S., 2017, 7th Annual Conference on Industrial Engineering and Operations Management, IEOM 2017. IEOM Society, p. 2282-2288 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modeling the perforation stress profile for analyzing hydraulic fracture initiation in a cased hole

  Fallahzadeh, S. H., Shadizadeh, S. R., Pourafshary, P. & Zare, M. R., 2010, Society of Petroleum Engineers - Nigeria Annual International Conference and Exhibition 2010, NAICE. Society of Petroleum Engineers, p. 370-378 9 p. (Society of Petroleum Engineers - Nigeria Annual International Conference and Exhibition 2010, NAICE; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  16 Citations (Scopus)

• Modelling an aquifer?s response to a remedial action in Wadi Suq, Oman

  Abdalla, O., Satti, O., Al-Rawahy, K., Kacimov, A. & Al-Zarie, H., 2007, Water Resources Management IV. WITPress, Vol. 103. p. 355-363 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Modelling and simulation of a cantilever-paddle beam under the effect of capillary, shock, and electrostatic forces

  Ouakad, H. M. & Younis, M. I., 2008, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. p. 677-682 6 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 4).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Modelling and simulation of a cantilever-paddle beam under the effect of capillary, shock, and electrostatic forces

  Ouakad, H. M. & Younis, M. I., Nov 23 2009, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. p. 677-682 6 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; vol. 4).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modelling newborn EEG background using atime-varying fractional Brownian process

  Stevenson, N., Rankine, L., Mesbah, M. & Boashash, B., 2007, 15th European Signal Processing Conference, EUSIPCO 2007 - Proceedings. p. 1246-1250 5 p. (European Signal Processing Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Modelling of a doubly fed induction generator (DFIG) to study its control system

  Billah, M. M., Hosseinzadeh, N. & Ektesabi, M. M., 2010, AUPEC 2010 - 20th Australasian Universities Power Engineering Conference: "Power Quality for the 21st Century". 5710805. (AUPEC 2010 - 20th Australasian Universities Power Engineering Conference: "Power Quality for the 21st Century").

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)