Arunachalam Ramanathan

Assistant Professor, Dr.

  • 935 Citations
  • 15 h-Index
20002019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 935 Citations
  • 15 h-Index
  • 33 Article
  • 8 Conference contribution
  • 1 Chapter
2019

Machining performance optimisation of mql-assisted turning of inconel-825 superalloy using ga for industrial applications

Tamang, S. K., Chandrasekaran, M., Palanikumar, K. & Ramanathan, A., Jan 1 2019, In : International Journal of Machining and Machinability of Materials. 21, 1-2, p. 43-64 22 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Production of aluminum alloy-based metal matrix composites using scrap aluminum alloy and waste materials: Influence on microstructure and mechanical properties

Krishnan, P. K., Christy, J. V., Ramanathan, A., Mourad, A. H. I., Muraliraja, R., Al-Maharbi, M., Murali, V. & Chandra, M. M., May 5 2019, In : Journal of Alloys and Compounds. 784, p. 1047-1061 15 p.

Research output: Contribution to journalArticle

21 Citations (Scopus)
2018

Corrosion behavior of a Ni–TiO2 nanocomposite coated by pulse electrodeposition

Sivaraman, V., Saravanakumar, N., Rajaram, G., Ramanathan, A. & Venkatesan, S., Jan 1 2018, In : High Temperature Material Processes. 22, 4, p. 219-229 11 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)
10 Citations (Scopus)

Effect of electrodeposition modes on ruthenium oxide electrodes for supercapacitors

Prataap, R. K. V., Ramanathan, A., Pavul Raj, R., Mohan, S. & Peter, L., Oct 1 2018, In : Current Applied Physics. 18, 10, p. 1143-1148 6 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Pulse electrodeposited RuO2 electrodes for high-performance supercapacitor applications

Arunachalam, R., Prataap, R. K. V., Pavul Raj, R., Mohan, S., Vijayakumar, J., Péter, L. & Al Ahmad, M., Jan 23 2018, (Accepted/In press) In : Surface Engineering. p. 1-7 7 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)
2017

Impact of the shape of electrode-tool on radical overcut of micro-hole in electrochemical micromachining

Thanigaivelan, R., Senthilkumar, R., Arunachalam, R. M. & Natarajan, N., Sep 1 2017, In : Surface Engineering and Applied Electrochemistry. 53, 5, p. 486-492 7 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Machinability of natural fiber reinforced composites: a review

Nassar, M. M. A., Arunachalam, R. & Alzebdeh, K. I., Feb 1 2017, In : International Journal of Advanced Manufacturing Technology. 88, 9-12, p. 2985-3004 20 p.

Research output: Contribution to journalArticle

46 Citations (Scopus)

Performance of electrochemical micromachining of copper through infrared heated electrolyte

Thanigaivelan, R., Arunachalam, R. M., Kumar, M. & Dheeraj, B. P., Feb 8 2017, (Accepted/In press) In : Materials and Manufacturing Processes. p. 1-7 7 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Techniques, Trends and Advances in Conventional Machining Practices for Metals and Composite Materials

Ramanathan, A., 2017, (Accepted/In press) Advances in Manufacturing Techniques for Materials: Engineering and Engineered. Srivatsan, T. S. (ed.). CRC Press/Balkema

Research output: Chapter in Book/Report/Conference proceedingChapter

2015

Development of nano-spherical RuO2 active material on AISI 317 steel substrate via pulse electrodeposition for supercapacitors

Arunachalam, R., Gnanamuthu, R. M., Al Ahmad, M., Mohan, S., Pavul Raj, R., Maharaja, J., Al Taradeh, N. & Al-Hinai, A., Aug 25 2015, In : Surface and Coatings Technology. 276, p. 336-340 5 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Electrochemical influence of nano-spherical RuO2.xH2O thin film on nickel adhesion layer as an anode via short-time pulse current technique for energy storage in rechargeable batteries

Gnanamuthu, R. M., Mohan, S., Al Ahmad, M., Arunachalam, R., Maharaja, J. & Bhagat, R., 2015, In : Journal of the Electrochemical Society. 162, 9, p. A1793-A1797

Research output: Contribution to journalArticle

2 Citations (Scopus)

Study on influence of electrodes in electric discharge machining

Thanigaivelan, R., Arunachalam, R. & Natarajan, N., Aug 1 2015, In : Recent Patents on Mechanical Engineering. 8, 2, p. 161-167 7 p.

Research output: Contribution to journalArticle

2014

Experimental investigation of edm processing parameters on machining al6063-12% sic-5% gr using response surface methodology

Pradeep Kumar, G., Thanigaivelan, R., Arunachalam, R. M. & Paramasivam, P., 2014, In : High Temperature Material Processes. 18, 1-2, p. 27-43 17 p.

Research output: Contribution to journalArticle

Mechanical properties of Ni-nano-Al2O3 composite coatings on AISI 304 stainless steel by pulsed electrodeposition

Jegan, A., Venkatesan, R. & Arunachalam, R., Jun 1 2014, In : Science and Engineering of Composite Materials. 21, 3, p. 351-358 8 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
2013

Electrochemical micromachining of stainless steel with acidified sodium nitrate electrolyte

Thanigaivelan, R., Arunachalam, R. M., Karthikeyan, B. & Loganathan, P., 2013, Procedia CIRP. Vol. 6. p. 351-355 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

20 Citations (Scopus)

Experimental study and analysis of micro holes machining in EDM of SS 304

Natarajan, N., Arunachalam, R. M. & Thanigaivelan, R., 2013, In : International Journal of Machining and Machinability of Materials. 13, 1, p. 1-16 16 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)
20 Citations (Scopus)
2012

Drilling of micro-holes on copper using electrochemical micromachining

Thanigaivelan, R., Arunachalam, R. M. & Drukpa, P., Aug 2012, In : International Journal of Advanced Manufacturing Technology. 61, 9-12, p. 1185-1190 6 p.

Research output: Contribution to journalArticle

23 Citations (Scopus)

Intelligent optimization and selection of machining parameters in finish turning and facing of Inconel 718

Senthilkumaar, J. S., Selvarani, P. & Arunachalam, R. M., Feb 2012, In : International Journal of Advanced Manufacturing Technology. 58, 9-12, p. 885-894 10 p.

Research output: Contribution to journalArticle

43 Citations (Scopus)

Machining performance study on Metal Matrix Composites-A response surface methodology approach

Srinivasan, A., Arunachalam, R. M., Ramesh, S. & Senthilkumaar, J. S., 2012, In : American Journal of Applied Sciences. 9, 4, p. 478-483 6 p.

Research output: Contribution to journalArticle

28 Citations (Scopus)
2011

Machining parameter optimization for production of nanocrystalline materials

Sasikumar, R., Arunachalam, R. M. & Srinivasa Gupta, N., 2011, In : Journal of Manufacturing Technology Research. 3, 1-2, p. 109-121 13 p.

Research output: Contribution to journalArticle

36 Citations (Scopus)

Production and characterization of micro and nano Al 2O 3 particle-reinforced LM25 aluminium alloy composites

Suresh, S. M., Mishra, D., Srinivasan, A., Arunachalam, R. M. & Sasikumar, R., Jun 2011, In : ARPN Journal of Engineering and Applied Sciences. 6, 6, p. 94-98 5 p.

Research output: Contribution to journalArticle

17 Citations (Scopus)

Study on influence of process parameter in micro - Electrical discharge machining (μ-EDM)

Jesudas, T. & Arunachalam, R. M., 2011, In : European Journal of Scientific Research. 59, 1, p. 115-122 8 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)
2010

Design and development of a table top electrochemical micromachining tool

Thanigaivelan, R., Arunachalam, R. M. & Subburam, V., 2010, 16th International Symposium on Electromachining, ISEM 2010. Shanghai Jiaotong University Press, p. 633-636 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of nano crystalline nickel coating for engineering applications

Ravi, S., Ganesh, K. V., Ramanathan, A., Annamalai, J. & Jaiswal, P. K., 2010, Key Engineering Materials. Vol. 443. p. 487-492 6 p. (Key Engineering Materials; vol. 443).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Experimental study of overcut in electrochemical micromachining for 304 stainless steel

Thanigaivelan, R. & Arunachalam, R. M., 2010, Transactions of the North American Manufacturing Research Institution of SME. Vol. 38. p. 253-260 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)
23 Citations (Scopus)
2009

Study of surface morphology in DC and pulse plating of silver alloy

Shanthi, C., Barathan, S., Jaiswal, R. & Arunachalam, R. M., Apr 2009, In : Indian Journal of Engineering and Materials Sciences. 16, 2, p. 128-132 5 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Synthesis of nanostructured aluminium matrix composite (AMC) through machining

Sasikumar, R. & Arunachalam, R. M., Nov 30 2009, In : Materials Letters. 63, 28, p. 2426-2428 3 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)
2008

The effect of pulse parameters in electro deposition of silver alloy

Shanthi, C., Barathan, S., Jaiswal, R., Arunachalam, R. M. & Mohan, S., Dec 15 2008, In : Materials Letters. 62, 30, p. 4519-4521 3 p.

Research output: Contribution to journalArticle

20 Citations (Scopus)
2007
4 Citations (Scopus)
2006

Comparison of surface roughness and residual stresses induced by coated carbide, ceramic and CBN cutting tools in high speed facing of Inconel 718

Arunachalam, R. M., Mannan, M. A. & Spowage, A. C., 2006, Transactions of the North American Manufacturing Research Institute of SME. Vol. 34. p. 87-94 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2004

Performance of CBN cutting tools in facing of age hardened inconel 718

Arunachalam, R. M. & Mannan, M. A., 2004, Transactions of the North American Manufacturing Research Institute of SME. Vol. 32. p. 525-532 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools

Arunachalam, R. M., Mannan, M. A. & Spowage, A. C., Jul 2004, In : International Journal of Machine Tools and Manufacture. 44, 9, p. 879-887 9 p.

Research output: Contribution to journalArticle

169 Citations (Scopus)

Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools

Arunachalam, R. M., Mannan, M. A. & Spowage, A. C., Nov 2004, In : International Journal of Machine Tools and Manufacture. 44, 14, p. 1481-1491 11 p.

Research output: Contribution to journalArticle

156 Citations (Scopus)
2003

Facing of inconel 718 using alumina based ceramics and PVD-TIALN coated carbide tools - A comparison

Arunachalam, R. M. & Mannan, M. A., 2003, Transactions of the North American Manufacturing Research Institution of SME. Vol. 31. p. 161-168 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Surface Finish and Residual Stresses in Facing of Age Hardened INCONEL 718

Arunachalam, R. M. & Mannan, M. A., 2003, In : Materials Science Forum. 437-438, p. 503-506 4 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)
2002

High speed facing of age hardened Inconel 718 using silicon carbide whisker reinforced ceramic tools

Arunachalam, R. M. & Mannan, M. A., 2002, Technical Paper - Society of Manufacturing Engineers. MR. MR02-197 ed. p. 1-8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2000

Machinability of nickel-based high temperature alloys

Arunachalam, R. & Mannan, M. A., 2000, In : Machining Science and Technology. 4, 1, p. 127-168 42 p.

Research output: Contribution to journalArticle

173 Citations (Scopus)