• 149 Citations
  • 7 h-Index
19942018
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2018

  • 149 Citations
  • 7 h-Index
  • 20 Article
  • 8 Conference contribution
  • 1 Chapter
2018
4 Citations (Scopus)

An experimental investigation of the effect of defect shape and orientation on the burst pressure of pressurised pipes

Al-Owaisi, S., Becker, A. A., Sun, W., Al Shabibi, A., Al-Maharbi, M., Pervez, T. & Al-Salmi, H., Nov 1 2018, In : Engineering Failure Analysis. 93, p. 200-213 14 p.

Research output: Contribution to journalArticle

Pipe
Defects
Plant shutdowns
Gas industry
Steel pipe
1 Citation (Scopus)

EXPERIMENTAL STUDY on the EFFECT of DRILL QUALITY on BONE TEMPERATURE in DRILLING

Alam, K., Imran, S. H., Al-Shabibi, A., Ghodsi, M. & Silberschmidth, V., Apr 1 2018, In : Biomedical Engineering - Applications, Basis and Communications. 30, 2, 1850018.

Research output: Contribution to journalArticle

Mandrillus
Bone
Bone and Bones
Drilling
Temperature
6 Citations (Scopus)
Drilling
Bone
Ultrasonics
Temperature
Vibrations (mechanical)
2 Citations (Scopus)

Investigation of thermoelastic problem of multiple-disc friction clutches applying different thermal loads

Abdullah, O. I., Schlattmann, J., Senatore, A. & Al Shabibi, A., Nov 1 2018, In : Heat and Mass Transfer/Waerme- und Stoffuebertragung. 54, 11, p. 3461-3471 11 p.

Research output: Contribution to journalArticle

clutches
Clutches
Thermal load
friction
Friction
High strength steel
Heat treatment
Steel
Brittle fracture
Tempering
2017
1 Citation (Scopus)

Design of a testing facility for investigation of drill pipes fatigue failure

Abdo, J., Hassan, E., Al-Shabibi, A. & Kwak, J., Jan 1 2017, In : Journal of Engineering Research. 14, 2, p. 105-114 10 p.

Research output: Contribution to journalArticle

Drill pipe
Fatigue of materials
Testing
Bottom-hole assembly
Vibrations (mechanical)

Fabrication of experimental setup for investigation of drill string fatigue failure

Abdo, J., Hassan, E. & Al-Shabibi, A., Jan 1 2017, 29th Conference on Mechanical Vibration and Noise. American Society of Mechanical Engineers (ASME), Vol. 8.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Drill strings
Fatigue
Fabrication
Strings
Fatigue of materials

Transient dynamic impact suppression of a Baja chassis using frontal and rear shock absorbers

Goher, K. M., Chenhui, K., Fadlallah, S. O., Shabibi, A. M. A. & Rawahi, N. Z. A., Mar 1 2017, (Accepted/In press) In : International Journal of Crashworthiness. p. 1-13 13 p.

Research output: Contribution to journalArticle

Shock absorbers
Chassis
suppression
Dynamic analysis
methodology
2015
15 Citations (Scopus)
Coiled tubing
Drilling fluids
lubricants
buckling
drilling
4 Citations (Scopus)

Finite Element Analysis of Transient Thermoelastic Behavior in Multi-Disc Clutches

Abdullah, O. I., Abd Al-Sahb, W. & Al-Shabibi, A., Apr 14 2015, SAE Technical Papers. April ed. SAE International, Vol. 2015-April.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Clutches
Finite element method
Separators
Thermal stress
Pressure distribution
2 Citations (Scopus)

Single slope solar water still with enhanced solar heating system

Al-Shabibi, A. M. & Tahat, M., Aug 31 2015, Recent Progress in Desalination, Environmental and Marine Outfall Systems. Springer International Publishing, p. 25-34 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Solar heating
Saline water
Water
Preheating
water
2014
1 Citation (Scopus)

Investigation of thermoelastic behaviour of the dry clutches under different boundary conditions

Abdullah, O. I., Schlattmann, J., Al-Shabibi, A. M. & Akhtar, M. J., Jan 1 2014, In : Journal of the Balkan Tribological Association. 20, 3, p. 395-408 14 p.

Research output: Contribution to journalArticle

Clutches
Boundary conditions
Flywheels
Thermal stress
Pressure distribution
7 Citations (Scopus)

Thermo-mechanical analysis of the dry clutches under different boundary conditions

Abdullah, O. I., Schlattmann, J. & Al-Shabibi, A. M., 2014, In : Tribology in Industry. 36, 2, p. 172-180 9 p.

Research output: Contribution to journalArticle

clutches
Clutches
Boundary conditions
boundary conditions
flywheels
8 Citations (Scopus)

Transient Behavior of Initial Perturbation in Multidisk Clutch System

AL-Shabibi, A. M., Nov 2 2014, In : Tribology Transactions. 57, 6, p. 1164-1171 8 p.

Research output: Contribution to journalArticle

clutches
Clutches
Eigenvalues and eigenfunctions
eigenvectors
perturbation
25 Citations (Scopus)

ZnO-clay nanocomposites for enhance drilling at HTHP conditions

Abdo, J., Zaier, R., Hassan, E., Al-Sharji, H. & Al-Shabibi, A., Oct 1 2014, In : Surface and Interface Analysis. 46, 10-11, p. 970-974 5 p.

Research output: Contribution to journalArticle

Zinc Oxide
Zinc oxide
drilling
zinc oxides
clays
2013

Micromechanical modeling of two-dimensional periodic cellular materials

Alzebdeh, K., Al-Shabibi, A. & Pervez, T., 2013, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). American Society of Mechanical Engineers (ASME), Vol. 9.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Elastic moduli
Boundary conditions
Microstructure
Poisson ratio
Elastic constants
15 Citations (Scopus)

Stresses and deformations analysis of a dry friction clutch system

Abdullaha, O. I., Schlattmanna, J. & Al-Shabibib, A. M., 2013, In : Tribology in Industry. 35, 2, p. 155-162 8 p.

Research output: Contribution to journalArticle

clutches
dry friction
Clutches
Friction
pressure distribution
2012
1 Citation (Scopus)
Heat conduction
Eigenvalues and eigenfunctions
Heat losses
Clutches
Brakes
2009
5 Citations (Scopus)

Dynamic effects of mandrel/tubular interaction on downhole solid tubular expansion in well engineering

Seibi, A. C., Karrech, A., Pervez, T., Al-Hiddabi, S., Al-Yahmadi, A. & Al-Shabibi, A., Mar 2009, In : Journal of Energy Resources Technology, Transactions of the ASME. 131, 1, p. 131011-131017 7 p.

Research output: Contribution to journalArticle

stick-slip
plastic deformation
engineering
Drawing (graphics)
friction

Solution of a non-linear heat conduction problem in automotive clutch and brake systems

Al-Shabibi, A. M., 2009, Proceedings of the ASME Summer Heat Transfer Conference 2009, HT2009. Vol. 2. p. 415-419 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Clutches
Brakes
Heat conduction
Boundary conditions
Pressure distribution
1 Citation (Scopus)

Solution of heat conduction problem in automotive clutch and brake systems

Al-Shabibi, A. M., 2009, 2008 Proceedings of the ASME Summer Heat Transfer Conference, HT 2008. Vol. 1. p. 321-326 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Clutches
Brakes
Heat conduction
Boundary conditions
17 Citations (Scopus)

Transient solution of the unperturbed thermoelastic contact problem

Al-Shabibi, A. M. & Barber, J. R., Mar 2009, In : Journal of Thermal Stresses. 32, 3, p. 226-243 18 p.

Research output: Contribution to journalArticle

clutches
brakes
Clutches
Brakes
Eigenvalues and eigenfunctions
2006

A simulation medium for a single wheel mobile robot using neurofuzzy

Rashid, M. K. & Al-Shabibi, A. M., 2006, Proceedings of the IASTED International Conference on Robotics and Applications. p. 19-24 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mobile robots
Wheels
Robots
Controllers
Robotics
2005

Automating error attenuation of cutting tools using smart material

Rashid, M. K. & Al-Shabibi, A. M., 2005, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005. Vol. 2 A. p. 691-698 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Intelligent materials
Cutting tools
Pulse width modulation
Electric potential
Time delay
2002
29 Citations (Scopus)

Transient solution of a thermoelastic instability problem using a reduced order model

Al-Shabibi, A. M. & Barber, J. R., Mar 2002, In : International Journal of Mechanical Sciences. 44, 3, p. 451-464 14 p.

Research output: Contribution to journalArticle

perturbation
Clutches
Direct numerical simulation
Brakes
Eigenvalues and eigenfunctions
2001

Prediction of running forces in high curvature well bores using finite element analysis and artificial neural network

Seibi, A. C., Gastli, A., Al-Shabibi, A. & Abdullah, H. A., Jun 2001, In : Petroleum Science and Technology. 19, 5-6, p. 521-534 14 p.

Research output: Contribution to journalArticle

artificial neural network
curvature
pipe
Pipe
Neural networks
2 Citations (Scopus)

Transient solution of 2-D TEI problem using reduced order models

Al-Shabibi, A. M. & Barber, J. R., 2001, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Clutches
Heat generation
Brakes
Mathematical models
Computer simulation
1998
3 Citations (Scopus)
curvature
pipe
Pipe
Finite element method
well
1994

Study of an airfoil with a flap and spoiler

Shabibi, A. A., Hammadi, M. A. & Mathew, J., Nov 1994, In : Journal of Aircraft. 31, 6, p. 1324-1327 4 p.

Research output: Contribution to journalArticle

Flaps
Airfoils
Angle of attack
Drag
Turbulence