Properties of Pervious Concrete Made with Ferrochrome Slag as a Coarse Aggregate

Khalifa S. Al-Jabri*, Kazi Md Abu Sohel

*المؤلف المقابل لهذا العمل

نتاج البحث: Chapter

ملخص

Ferrochrome slag (FCS) is produced during the production of ferrochrome alloy, which is an essential component of stainless steel. FCS has favorable physical and chemical properties for use as an aggregate in place of natural aggregate in the production of conventional and pervious concrete. Previous studies reported that the mechanical properties of concrete are enhanced when FCS is used in place of natural aggregates. This study evaluated the performance of pervious concrete containing FCS aggregates to replace the natural aggregates (NA) in various percentages (0%, 25%, 50%, 75% and 100% by weight). The effect of FCS replacement ratios on the mechanical properties (compressive strength, flexural strength, and split tensile strength), water permeability in terms of infiltration rate and density of the pervious concrete were determined. The results showed that the coefficient of water permeability increases with the increase of ferrochrome slag content. However, the compressive strength and density are reduced due to the increase of he porosity of the concrete. The optimum replacement percentage of natural aggregate with FCS aggregate was found to be 75%. The study concluded that it is possible to produce sustainable pervious concrete by using waste ferrochrome slag.

اللغة الأصليةEnglish
عنوان منشور المضيفKey Engineering Materials
ناشرTrans Tech Publications Ltd
الصفحات109-115
عدد الصفحات7
مستوى الصوت 945
المعرِّفات الرقمية للأشياء
حالة النشرPublished - مايو 19 2023

سلسلة المنشورات

الاسمKey Engineering Materials
رقم المعيار الدولي للدوريات (المطبوع)1662-9795

ASJC Scopus subject areas

  • ???subjectarea.asjc.2500.2500???
  • ???subjectarea.asjc.2200.2211???
  • ???subjectarea.asjc.2200.2210???

قم بذكر هذا