Limited studies had been conducted using water-in-diesel emulsion produced from ultrasonic homogenizing method. In this study, Water-in-Biodiesel Emulsions (WiBE) produced using ultrasonic homogenizer were characterized and studied for their physical and chemical properties through various laboratory investigations. The data were then compared with WiBE produced using mechanical homogeniser by the current researchers. Physical characterization tests were carried out on 24 WiBE emulsions produced using an ultrasonic bath, with water percentage of 9%, 12% and 15%, HLB value of 6, 7, 8 and 9, and surfactant dosage of 5% and 10%. The water droplets produced using ultrasonic homogeniser were found to be evenly distributed and generally smaller in size. The density and viscosity values of these emulsions were found to be uniformly larger than WiBE produced using mechanical homogeniser. Emulsions with 15% water exceeded the density threshold, indicating the limits of the amount of water which can be added to the biodiesel fuel. Also, it was found that for viscosity, the HLB is limited to HLB 9 for higher surfactant dosage.
|دورية||MATEC Web of Conferences|
|المعرِّفات الرقمية للأشياء|
|حالة النشر||Published - نوفمبر 5 2018|
|الحدث||2018 UTP-UMP-VIT Symposium on Energy Systems, SES 2018 - Tamil Nadu|
المدة: سبتمبر ١٨ ٢٠١٨ → سبتمبر ١٩ ٢٠١٨
ASJC Scopus subject areas