Facing of inconel 718 using alumina based ceramics and PVD-TIALN coated carbide tools - A comparison

R. M. Arunachalam*, M. A. Mannan

*المؤلف المقابل لهذا العمل

نتاج البحث: Conference contribution

5 اقتباسات (Scopus)

ملخص

This paper compares the performance of alumina based ceramic tools (silicon carbide whisker reinforced alumina and mixed alumina) and TiAIN coated carbide tool in the facing operation of solution annealed Inconel 718 components. The tool failure modes, tool life, surface roughness, material removal rates (MMR) and the total material removed (TMR) have been compared. The silicon carbide whisker reinforced alumina inserts are found to be more suitable for roughing and semi-finishing while the TiAIN coated carbide inserts can comfortably be employed for finishing applications owing to lower risk of sudden chipping and good surface roughness over a reasonably long machining time.

اللغة الأصليةEnglish
عنوان منشور المضيف31st North American Manufacturing Research Conference 2003 - Transactions of the North American Manufacturing Research Institution of SME
الصفحات161-168
عدد الصفحات8
حالة النشرPublished - 2003
منشور خارجيًانعم
الحدث31st North American Manufacturing Research Conference, NAMRC 31 - Hamilton, ON, Canada
المدة: مايو ٢٠ ٢٠٠٣مايو ٢٣ ٢٠٠٣

سلسلة المنشورات

الاسمTransactions of the North American Manufacturing Research Institution of SME
مستوى الصوت31
رقم المعيار الدولي للدوريات (المطبوع)1047-3025

Other

Other31st North American Manufacturing Research Conference, NAMRC 31
الدولة/الإقليمCanada
المدينةHamilton, ON
المدة٥/٢٠/٠٣٥/٢٣/٠٣

ASJC Scopus subject areas

  • ???subjectarea.asjc.2200.2210???
  • ???subjectarea.asjc.2200.2209???

بصمة

أدرس بدقة موضوعات البحث “Facing of inconel 718 using alumina based ceramics and PVD-TIALN coated carbide tools - A comparison'. فهما يشكلان معًا بصمة فريدة.

قم بذكر هذا