Effect of water quality on the strength of flowable fill mixtures

A. S. Al-Harthy*, R. Taha, J. Abu-Ashour, K. Al-Jabri, S. Al-Oraimi

*المؤلف المقابل لهذا العمل

نتاج البحث: المساهمة في مجلةArticleمراجعة النظراء

32 اقتباسات (Scopus)

ملخص

Fresh water is a precious and scarce commodity in all arid regions such as Oman and other parts of the Arabian Peninsula. However, non-fresh water supplies including brackish groundwater and oily water that accompanies oil production activities, and treated wastewater exist in abundant quantities in these regions. A flowable fill, also known as a controlled low strength material, is a self-compacted, cementitious material used primarily as a backfill. It is generally a mixture of fine aggregates, small amount of cement, fly ash, and water. This paper discusses the potential use of groundwater and oily production water in flowable fills. The water used in this research work was obtained from four major oil production fields. Cement by-pass dust (CBPD) was used as an alternative to fly ash. Results indicate that the use of non-fresh water will produce lower compressive strength in comparison with tap water. However, all water types would still generate an acceptable 28-day strength requirement of 350-3500 kPa for flowable fills. With the exception of a few mixes, flowable fill blends prepared using brackish groundwater gave higher strength than mixes prepared using oily production water. Generally, there was no appreciable difference in slump values for most of the mixes.

اللغة الأصليةEnglish
الصفحات (من إلى)33-39
عدد الصفحات7
دوريةCement and Concrete Composites
مستوى الصوت27
رقم الإصدار1
المعرِّفات الرقمية للأشياء
حالة النشرPublished - يناير 2005

ASJC Scopus subject areas

  • ???subjectarea.asjc.2200.2215???
  • ???subjectarea.asjc.2500.2500???

بصمة

أدرس بدقة موضوعات البحث “Effect of water quality on the strength of flowable fill mixtures'. فهما يشكلان معًا بصمة فريدة.

قم بذكر هذا