Characterization of plasma etching induced interface states at Tip-SiGe Schottky contacts

M. Mamor*, A. Sellai

*المؤلف المقابل لهذا العمل

نتاج البحث: المساهمة في مجلةArticleمراجعة النظراء

8 اقتباسات (Scopus)


The authors have used current-voltage (I-V) data measured over a wide temperature range (100-300 K) complemented by deep level transient spectroscopy (DLTS) for the assessment of the defects introduced in Si0.95 Ge0.05 by argon plasma sputter etching. From DLTS, defect concentration depth profiling was extracted and revealed that the main defect introduced during argon plasma sputtering is located very close to the surface. I-V-T analysis shows that the electrical characteristics deviated from the ideal case and indicate the presence of interface states, resulting from the plasma etching induced surface states at Ti Si0.95 Ge0.05 interface. The interface state density as well as its temperature dependence were obtained from forward bias I-V-T measurements by considering the bias dependence of effective barrier height e. It is found that interface states density is temperature dependent although weakly.

اللغة الأصليةEnglish
الصفحات (من إلى)705-709
عدد الصفحات5
دوريةJournal of Vacuum Science and Technology A: Vacuum, Surfaces and Films
مستوى الصوت26
رقم الإصدار4
المعرِّفات الرقمية للأشياء
حالة النشرPublished - 2008

ASJC Scopus subject areas

  • ???subjectarea.asjc.3100.3104???
  • ???subjectarea.asjc.3100.3110???
  • ???subjectarea.asjc.2500.2508???


أدرس بدقة موضوعات البحث “Characterization of plasma etching induced interface states at Tip-SiGe Schottky contacts'. فهما يشكلان معًا بصمة فريدة.

قم بذكر هذا